* resolve all _existing_ content paths
* pin `@napi-rs/cli`
* WIP: Log all resolved content files/globs
* only filter out raw changed content in non-auto mode
* skip parseCandidateFiles cache in `auto` mode
* improve algorithm of detecting content paths
1. Files in the root should be listed statically instead of using globs.
2. Files and folders in special known direct child folders should be
listed statically instead of using globs (e.g.: `public`). This is
because these special folders are often used to store generated AND
source files at the same time. Using globs could trigger infinite
loops because we are watching and acting upon dist files.
3. All file extensions found in the project, should be used in the globs
in addition to a known set of extensions.
4. Direct folders seen from the root, can use the glob syntax
`<root>/src/**/*.{...known-extensions}`
* inline wanted-extensions
Not 100% convinced yet, but seems cleaner so far.
* ensure writing an file also makes the parent folder(s)
* add integration tests for the auto content feature
* add pnpm and bun lock files
* Revert "inline wanted-extensions"
This reverts commit 879c1248524e84216125f4a24e0160b40736333a.
* sort binary-extensions and add lockb
* sort + add `lock` to ignored extensions
* drop `yarn.lock`, because lock extensions are already covered
* group template extensions
This will make it a bit easier to organize in the future.
* drop empty lines and commented lines from template-extensions
* skip the config path when resolving template files
The config file will automatically trigger a rebuild when this file is
changed. However, this should not be part of the template files because
that could cause additional css that's not being used.
* make `auto content` the default in the oxide engine
- In the oxide engine, the default `content: []` will be dropped from
the default configuration (config.simple.js, config.full.js).
- If you have `content: []` or `content: { files: [] }` then the auto
content feature won't be active. However if those arrays are empty a
warning will still be shown. Adding files/globs or dropping the
`content` section completely will enable auto content.
* only test the auto content integration test in the oxide engine
* set `content.files` to `auto` instead of using `auto: boolean`
This way we don't run into the issue where the `config.content.files` is
set and the `config.content.auto` is set to true.
* drop log
* ensure we validate the config in the CLI
* show experimental warning for automatic content detection
* use cached version of the getCandidateFiles instead of bypassing it
* use `is_empty()` shorthand
Thanks, Clippy!
* add test to ensure nested ignored folders are not scanned
* add `tempfile` for tests
* add auto content tests in Rust
* refactor auto content detection
This will also make sure that if we have (deeply) nested ignored
folders, then we won't use deeply nested globs (**/*.{js,html}) for the
parent(s) of the nested ignored folders but instead use a shallow glob
for each directory (*/*.{js,html}).
Then each sibling directory of the parent can use deeply nested globs
again except for the direct parent.
* use consistent comments
* ensure ignored static listed files are not present
* improve performance by ~30x
On a big test project this goes from ~6s to ~200ms
* improve performance by ~5x
We started with a ~6s duration
Then in the previous commit, we improved it by ~30x and it went down to
~200ms
Now with this change, it takes about ~40ms. That's another ~5x
improvement.
Or in total a ~150x improvement.
* ensure nested folders in `public/` are also explicitly listed
* add shortcut for normalizing files
This is only called once so won't do anything to the main performance of
Tailwind CSS. But always nice to make small performance improvements!
* run Rust tests in CI
* fix lint warnings
* update changelog
* Update CHANGELOG.md
---------
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
* replace `env.OXIDE` with global `__OXIDE__`
This will allow us to replace the `__OXIDE__` at build time, and fully
remove the branches from the final code so that there is not even any
reference to `@tailwindcss/oxide` on the stable engine.
* update changelog
* use `env.ENGINE` in integration tests
* drop oxide branching for the PostCSS plugin for now
This is currently a redirect to the same file, so doesn't hurt.
* Enable better dead-code elimination
* Update CLI tests
Fix indentation
* Fix indentation
---------
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
* try to use `config.default` before using `config`
* update changelog
* add quick `SHOW_OUTPUT` toggle for integration tests
Setting this to `true` shows the output of the executed commands.
* add integration tests for `tailwind.config.ts` and `tailwind.config.js` with ESM syntax
* disable color opacity plugins by default for the `oxide` engine
* update tests to reflect this change in the `oxide` engine
* update changelog
* reflect changes in integration tests
* bump lightningcss
* use `lightningcss` in the main PostCss Plugin
* use lightningcss in our custom matchers
Now that we are using `lightningcss` and nesting in the new `oxide`
engine, the generated output _will_ be different in the majority of test
cases.
Using a combination of `prettier` and `lightningcss` will make the
output consistent.
The moment we are fully using the `oxide` engine, we can drop
`lightningcss` or `prettier` again to improve the performance of the
tests.
* update tests to apply `lightningcss` related changes
* update changelog
* add `lightningcss` and `browserslist` as dev dependencies to stable package.json
* only use `lightningcss` in tests (without prettier)
We will only fallback to prettier if lightningcss fails somehow.
* apply side effect chagnes due to only using lightningcss for tests
* make CI happy (integration tests)
Apply changes to integration tests now that we are using lightningcss
* transform `lightningcss` for Node 12 when running tests
* run prettier on failing tests for `toMatchFormattedCss`
This will result in better diffs because diffs are typically per block
and/or per line. But lightningcss will simplify certain selectors and
the diff won't be as clear.
We will only apply the prettier formatting for failing tests in the diff
view so that diffs are cleaner and we don't pay for the additional
prettier calls when tests pass.
* Record and watch PostCSS dependencies in the CLI
* ensure `changedContent` gets cleared
Otherwise this list gets bigger and bigger, not only that there is a
subtle bug. The moment you save a `.css` file we want to create a new
context and start from scratch. However, since the list was never
cleared, it meant that every subsequent save to *any* file (not only
config / css files) creates a new context...
By clearing the least we should work around this problem.
* add test that verifies an odd bug
The story goes like this:
1. add `underline` to html file
-> css contains `underline` rule
2. add `font-bold` to html file
-> css contains `underline` and `font-bold`
3. remove `underline` from html file
-> css still contains `underline` and `font-bold` for performance reasons
4. Save a css file (! RED FLAG)
-> css contains `font-bold` because we started from scratch
5. add `underline` to html file
-> css contains `underline` and `font-bold`
6. remove `underline` from html file
-> css only contains `font-bold`... (UH OH)
This is because the moment we did step 4, every single save in any file created a new context. Every. Single. Time.
* use a property that doesn't require `autoprefixer`
* update changelog
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
* Add content glob integration tests
* Use tagged version in parcel integration tests
* Upgrade postcss-cli integration tests
* upgrade integration test deps
* Fix CS
* Fix tests
* Update lockfile
* Fix vite test in CI
* add prettier-plugin-tailwindcss
This will use the prettier plugin in our tests as well, yay consistency!
* ensure that both `group` and `peer` can't be used in `@apply`
This was only configured for `group`
* expose `sortClassList` on the context
This function will be used by the `prettier-plugin-tailwindcss` plugin,
this way the sorting happens within Tailwind CSS itself adn the
`prettier-plugin-tailwindcss` plugin doesn't have to use internal /
private APIs.
The signature looks like this:
```ts
function sortClassList(classes: string[]): string[]
```
E.g.:
```js
let sortedClasses = context.sortClassList(['p-1', 'm-1', 'container'])
```
* update changelog
* add sort test for utilities with the important modifier e.g.: `!p-4`
* use outputFile instead of direct writeFile
This is an improvement we introduced earlier but forgot this part.
* allow to pipe in data to the CLI
* add integration tests to validate piping to the CLI
* update changelog
* use String.raw for css escapes
This will allow us to write code like:
```css
.mobile\:font-bold {}
```
Instead of
```css
.mobile\\:font-bold {}
```
Which resembles "real" css way better in our tests.
* use String.raw in integration tests as well
* immediately take the `safelist` values into account
Currently we had to manually add them in the `setupTrackingContext`,
`setupWatchingContext` and the `cli`.
This was a bit cumbersome, because the `safelist` function (to resolve
regex patterns) was implemented on the context. This means that we had
to do something like this:
```js
let changedContent = []
let context = createContext(config, changedContent)
for (let content of context.safelist()) {
changedContent.push(content)
}
```
This just feels wrong in general, so now it is handled internally for
you which means that we can't mess it up anymore in those 3 spots.
* drop the dot from the extension
Our transformers and extractors are implemented for `html` for example.
However the `path.extname()` returns `.html`.
This isn't an issue by default, but it could be for with custom
extractors / transformers.
* normalize the configuration
* make shared cache local per extractor
* ensure we always have an `extension`
Defaults to `html`
* splitup custom-extractors test
* update old config structure to new structure
* ensure we validate the "old" structure, and warn if invalid
* add tests with "old" config, to ensure it keeps working
* add missing `content` object
* inline unnecessary function abstraction
* setup integration tests
* fix rgb color syntax
* ensure integration tests always exit
If for any reason the integration tests fail, then it will run forever
on CI (~2hours or something). The `--forceExit` is not ideal but it will
prevent long running processes.
* fix incorrect test
We were never properly waiting for the command to finish.
* handle AbortError properly
In CI, when an AbortController gets aborted an error is thrown
(AbortError). If we don't catch it properly then it will "leak" and the
test will fail.
* improve IO functions
* quit integration tests after 10seconds
* only test a few integrations
* test all integrations using matrix
This will cancel other builds when one fails, it will also separate the
output per integration which can be useful especially now that we are
still figuring things out.
* rename `build` to `test`
* add --verbose flag to receive output in the console
* when reading stdout or stderr, wait a certain about to ensure stability
Debouncing for 200ms means that if another message comes in within those
200ms we delay the execution of the callback.
* simplify workflow
* use terminal output instead of disk events
* cache node_modules for integrations
* empty commit, to test cache hits
* make `jit` mode the default when no mode is specified
* unify JIT and AOT codepaths
* ensure `Object.entries` on undefined doesn't break
It could be that sometimes you don't have values in your config (e.g.: `presets: []`), this in turn will break some plugins where we assume we have a value.
* drop AOT specific tests
These tests are all covered by JIT mode already and were AOT specific.
* simplify tests, and add a few
Some of the tests were written for AOT specifically, some were missing. We also updated the way we write those tests, essentially making Tailwind a blackbox, by testing against the final output.
Now that JIT mode is the default, this is super fast because we only generate what is used, instead of partially testing in a 3MB file or building it all, then purging.
* add some todo's to make sure we warn in a few cases
* make `darkMode: 'media'`, the default
This also includes moving dark mode tests to its own dedicated file.
* remove PostCSS 7 compat mode
* update CLI to be JIT-first
* fix integration tests
This is not a _real_ fix, but it does solve the broken test for now.
* warn when using @responsive or @variants
* remove the JIT preview warning
* remove AOT-only code paths
* remove all `mode: 'jit'` blocks
Also remove `variants: {}` since they are not useful in `JIT` mode
anymore.
* drop unused dependencies
* rename `purge` to `content`
* remove static CDN builds
* mark `--purge` as deprecated in the CLI
This will still work, but a warning will be printed and it won't show up
in the `--help` output.
* cleanup nesting plugin
We don't have to duplicate it anymore since there is no PostCSS 7
version anymore.
* make sure integration tests run in band
* cleanup folder structure
* make sure nesting folder is available
* simplify resolving of purge/content information
* fix --help output in tests
* add tests to ensure we can use `purge.safelist`
* implement the `purge.safelist` for strings
* proxy `purge.safelist` to `purge.options.safelist`
This allows us to have a similar API in `AOT` and `JIT` mode.
* only proxy `purge.safelist` to `purge.options.safelist` if
`purge.options.safelist` doesn't exists yet.
