* resolve all _existing_ content paths
* pin `@napi-rs/cli`
* WIP: Log all resolved content files/globs
* only filter out raw changed content in non-auto mode
* skip parseCandidateFiles cache in `auto` mode
* improve algorithm of detecting content paths
1. Files in the root should be listed statically instead of using globs.
2. Files and folders in special known direct child folders should be
listed statically instead of using globs (e.g.: `public`). This is
because these special folders are often used to store generated AND
source files at the same time. Using globs could trigger infinite
loops because we are watching and acting upon dist files.
3. All file extensions found in the project, should be used in the globs
in addition to a known set of extensions.
4. Direct folders seen from the root, can use the glob syntax
`<root>/src/**/*.{...known-extensions}`
* inline wanted-extensions
Not 100% convinced yet, but seems cleaner so far.
* ensure writing an file also makes the parent folder(s)
* add integration tests for the auto content feature
* add pnpm and bun lock files
* Revert "inline wanted-extensions"
This reverts commit 879c1248524e84216125f4a24e0160b40736333a.
* sort binary-extensions and add lockb
* sort + add `lock` to ignored extensions
* drop `yarn.lock`, because lock extensions are already covered
* group template extensions
This will make it a bit easier to organize in the future.
* drop empty lines and commented lines from template-extensions
* skip the config path when resolving template files
The config file will automatically trigger a rebuild when this file is
changed. However, this should not be part of the template files because
that could cause additional css that's not being used.
* make `auto content` the default in the oxide engine
- In the oxide engine, the default `content: []` will be dropped from
the default configuration (config.simple.js, config.full.js).
- If you have `content: []` or `content: { files: [] }` then the auto
content feature won't be active. However if those arrays are empty a
warning will still be shown. Adding files/globs or dropping the
`content` section completely will enable auto content.
* only test the auto content integration test in the oxide engine
* set `content.files` to `auto` instead of using `auto: boolean`
This way we don't run into the issue where the `config.content.files` is
set and the `config.content.auto` is set to true.
* drop log
* ensure we validate the config in the CLI
* show experimental warning for automatic content detection
* use cached version of the getCandidateFiles instead of bypassing it
* use `is_empty()` shorthand
Thanks, Clippy!
* add test to ensure nested ignored folders are not scanned
* add `tempfile` for tests
* add auto content tests in Rust
* refactor auto content detection
This will also make sure that if we have (deeply) nested ignored
folders, then we won't use deeply nested globs (**/*.{js,html}) for the
parent(s) of the nested ignored folders but instead use a shallow glob
for each directory (*/*.{js,html}).
Then each sibling directory of the parent can use deeply nested globs
again except for the direct parent.
* use consistent comments
* ensure ignored static listed files are not present
* improve performance by ~30x
On a big test project this goes from ~6s to ~200ms
* improve performance by ~5x
We started with a ~6s duration
Then in the previous commit, we improved it by ~30x and it went down to
~200ms
Now with this change, it takes about ~40ms. That's another ~5x
improvement.
Or in total a ~150x improvement.
* ensure nested folders in `public/` are also explicitly listed
* add shortcut for normalizing files
This is only called once so won't do anything to the main performance of
Tailwind CSS. But always nice to make small performance improvements!
* run Rust tests in CI
* fix lint warnings
* update changelog
* Update CHANGELOG.md
---------
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
* make `sequential` and `parallel` version of a new (tmp) `parse_candidate_strings`
* use bitmasks for the strategy
Only sending a number over the wire instead of a serialized objects.
* use cleaner match syntax
* Refactor
* Don’t resolve functions for anything not using theme or screen
* Normalize math operators inside calc when handling functions
* Inline postcss-value-parser
* Treat all functions the same as calc
* Remove workaround for calc + operators without spaces
* Remove `postcss-value-parser` dependency
* Update lockfile
* Update sourcemaps
* Update changelog
* Update `value-parser` formatting
* Stop prettier from complaining
* disable useragent styling for dialog
* nits
* Update src/css/preflight.css
* Simplify dialog reset
We don’t want to reset everything here. Just the padding should be enough.
* Update test
---------
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
* Make font settings propagate into buttons, inputs, etc.
* update source-maps test due to preflight change
* update changelog
---------
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
* Fix issues with some pseudo-elements
We’ve included pseudo elements for backdrop, marker, placeholder, and selection and they were all “jumpable” before we made changes in v3.3.2. Ideally they wouldn’t be because if they ever eventually have any interactivity that could become a problem.
* Update changelog
* bump `postcss-load-config` in the oxide engine
* bump `postcss-load-config` in the stable engine
* update changelog
* Switch to stable
* Update Node to v14
* Update to latest dependency versions
* Update test helper for new version of `rimraf`
Co-Authored-By: Jordan Pittman <jordan@cryptica.me>
* Downgrade `lightningcss` to `v1.18.0`
Co-Authored-By: Jordan Pittman <jordan@cryptica.me>
* Switch back to oxide
* Update Github actions from Node 12 to Node 14
* Update oxide dependencies
* Update stable dependencies
* Update `content-resolution` integration test dependencies
* Update `postcss-cli` integration test dependencies
* Update `rollup` integration test dependencies
* Update `rollup-sass` integration test dependencies
* Update `vite` integration test dependencies
* Update `webpack-5` integration test dependencies
* Update changelog
* Remove `color-name` dependency
* Replace `quick-lru` dependency with `@alloc/quick-lru`
* Replace `quick-lru` dependency with `@alloc/quick-lru` in stable
* Fix standalone CLI test
---------
Co-authored-by: Jonathan Reinink <jonathan@reinink.ca>
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
* ensure we normalize the arbitrary modifiers
This applies the same rules as arbitrary values. The `_` can be used in
place of a space. If you _do_ want an underscore, you can escape it with
`\_` (`\\_` in JavaScript).
* update changelog
* ensure that last `]` doesn't stop the match
Given this input:
```html
<div class="[width:_calc(theme(spacing[5])_+_theme(spacing[5]))]"></div>
```
Then we would expect the match to be this:
```
[width:_calc(theme(spacing[5])_+_theme(spacing[5]))]
```
However, with the `?`, then it would stop and result in:
```
[width:_calc(theme(spacing[5])_+_theme(spacing[5]
```
Which makes it incomplete because the `))]` are missing at the end.
* update changelog
* replace `env.OXIDE` with global `__OXIDE__`
This will allow us to replace the `__OXIDE__` at build time, and fully
remove the branches from the final code so that there is not even any
reference to `@tailwindcss/oxide` on the stable engine.
* update changelog
* use `env.ENGINE` in integration tests
* drop oxide branching for the PostCSS plugin for now
This is currently a redirect to the same file, so doesn't hurt.
* Enable better dead-code elimination
* Update CLI tests
Fix indentation
* Fix indentation
---------
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
* Don’t move `::deep` pseudo element to end of selector when using `@apply`
* Update changelog
* Move pseudo-elements in two passes
* Rewrite pseudo-element relocation logic
* Update test
`::test` is an unknown pseudo element and therefore may be actionable _and_ nestable
* Add tests
* Simplify tests
* Simplify
* run tests on CI multiple times
This works around the timeouts/flakeyness of GitHub Actions
* Update formatting
* Add comment
* Mark webkit peusdo elements as terminal
* update comment
* only execute the `global-setup` once
* Simplify
NO SORT FN YAY
* Use typedefs
* Update changelog
* Update changelog
* update again
---------
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
* WIP
* Move warning to validateConfig
This only happens in setupTrackingContext outside of resolveConfig
* Use original dynamic require approach in `validateConfig`
The important thing is that this happens in Node-land only. It is outside of `resolveConfig` which is public and importable into user projects. That is the scenario that breaks because of static import hoisting.
* Don’t reference process when it might be undefined
The `resolveConfig` dep path is public which should not reference process. However, we have some behavior that changes based on env vars so we need to conditionalize it instead.
* Update changelog
* Formatting
* More formatting
* Update changelog
---------
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
Co-authored-by: Jonathan Reinink <jonathan@reinink.ca>
* drop `@tailwindcss/line-clamp` check
This won't work in places where `require` calls are hoisted so that
they become static imports. This means that in some projects this
`require` call was breaking the full application even though it was
intentionally put in a try/catch block...
* update changelog
* Revert prepare of v3.3
* Revert "Revert prepare of v3.3"
This reverts commit 14d5a0a7c6.
* update SafelistConfig type
I think this type was meant to be like this?
* format types
* update changelog
---------
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
* Pull pseudo elements outside of `:is` and `:has` when using `@apply`
* Update changelog
* Refactor
* Update important selector handling for :is and :has
* fixup
* fixup
* trigger CI
---------
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
* try to use `config.default` before using `config`
* update changelog
* add quick `SHOW_OUTPUT` toggle for integration tests
Setting this to `true` shows the output of the executed commands.
* add integration tests for `tailwind.config.ts` and `tailwind.config.js` with ESM syntax
* add gradient color stop positions
* update tests to include gradient position color stop reset values
* add dedicated color stop position tests
* use `%` sign in the name of the uility
* update changelog
* ensure `length` values and css variables work
