This is safer and possibly fixes invalid reads on truncated data.
(cherry-picked from commit 541427ab4d)
CC:libav-stable@libav.org
Conflicts:
libavcodec/eamad.c
(cherry picked from commit f9204ec56a)
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The actual predictor value, set by the trellis code, never
was written back into the variable that was written into
the block header. This was accidentally removed in b304244b.
This significantly improves the audio quality of the trellis
case, which was plain broken since b304244b.
Encoding IMA QT with trellis still actually gives a slightly
worse quality than without trellis, since the trellis encoder
doesn't use the exact same way of rounding as in
adpcm_ima_qt_compress_sample and adpcm_ima_qt_expand_nibble.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit 0776e0ef6b)
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This was broken in 095be4fb - samples+ch (for the previous
non-planar case) equals &samples_p[ch][0]. The confusion
probably stemmed from the IMA WAV case where it originally
was &samples[avctx->channels + ch], which was correctly
changed into &samples_p[ch][1].
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit 3d79d0c93e)
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
As indicated in the function documentation, the header MUST be
checked prior to calling it because no consistency check is done
there.
CC:libav-stable@libav.org
(cherry picked from commit f2f2e7627f)
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes an invalid read past the end of avpriv_mpa_freq_tab.
Fixes divide-by-zero due to sample_rate being set to 0.
Bug-Id: 705
CC:libav-stable@libav.org
Conflicts:
libavcodec/mpegaudiodecheader.c
Only consume an AVPacket when all the samples have been read.
When the rate of samples output is limited (by the default value
of max_samples), consuming the first packet immediately will cause
timing problems:
- The first packet with PTS 0 will output 4608 samples and be
consumed entirely
- The second packet with PTS 64 will output the remaining samples
(typically, a lot, that's why max_samples exist) until the decoded
samples of the first packet have been exhausted, at which point the
samples of the second packet will be decoded and output when
av_decode_frame is called with the next packet).
That means there's a PTS jump since the first packet is 'decoded'
immediately, which can be seen with avplay or mplayer: the timing
jumps immediately to 6.2s (which is the size of a packet).
Sample: http://streams.videolan.org/issues/6348/Goldwave-MAClib.ape
Bug-Debian: http://bugs.debian.org/744901
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
(cherry picked from commit 91d4cfb812)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
In case start_frame() fails, this potentially invalid frame can still be
output to the caller.
Bug-Id: 672
Bug-Id: debian/741240
Bug-Id: ubuntu/1288206
This is basically an overread/overwrite-safe memcpy between a
GetByteContext and a PutByteContext.
CC:libav-stable@libav.org
(cherry picked from commit 5748faf291)
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
CC:libav-stable@libav.org
(cherry picked from commit de9d2705f6)
avcodec_flush_buffers() must release all internally held references
according to its documentation, for which all the threads need to be
flushed.
CC:libav-stable@libav.org
Bug-Id: vlc/9665
Otherwise the generic code will unref them, which can then result in
last_picture_ptr == current_picture_ptr, which causes deadlocks at least
in rv40.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
Prevents using GetBitContexts with data from previous calls.
Fixes access to freed memory.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
Otherwise the ER code might try to use some already freed references.
Fixes possible access to freed memory.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
In this case we may not have a current frame, while first_field being
set implies we do.
Fixes invalid reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
Higher modes are not allowed for 16x16/chroma, which is what this
function is used for. Otherwise this function would return 0 (vertical
prediction) for invalid higher modes, which could result in invalid
reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
There is no point in delaying the check and it avoids bugs with a
half-initialized context.
Fixes invalid reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
If it was set before then we can end up trying to decode a slice without
a valid slice header, which can lead to invalid memory access.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
(cherry picked from commit 58312b2472)
Avoid a division by 0 in ff_mpeg4_set_one_direct_mv.
Sample-Id: 00000168-google
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
(cherry picked from commit 9514440337)
(cherry picked from commit 5df52b0131)
Fixes invalid writes on pixel format changes.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
(cherry picked from commit 4c3e1956ee)
And use the value from the specification.
Sample-Id: 00000451-google
Found-by: Mateusz j00ru Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
(cherry picked from commit f777504f64)
(cherry picked from commit 5bd083d0216d9ee649039c84999fb61386536ac1)
Conflicts:
libavcodec/h264.c
Fixes an issue where the B-frame coding mode switches from interlaced
fields to interlaced frames, causing incorrect decisions in the motion
compensation code and resulting in visual artifacts.
CC: libav-stable@libav.org
Signed-off-by: Tim Walker <tdskywalker@gmail.com>
(cherry picked from commit dd2d0039b6)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
An invalid VUI is not considered a fatal error, so the SPS containing it
may still be used. Leaving an invalid value of num_reorder_frames there
can result in writing over the bounds of H264Context.delayed_pic.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC:libav-stable@libav.org
(cherry picked from commit 9ecabd7892)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Conflicts:
libavcodec/h264_ps.c
And manage the reallocation failure path.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 5e992a4682)
Fixes out of array accesses and integer overflows.
(cherry picked from commit d1916d13e2)
Adresses: CVE-2013-7010, CVE-2013-7014
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
