* exclude `Features.LogicalProperties` lightningcss feature
We don't want this to automatically apply since we have dedicated
logical property based utilities already.
We also have a feature flag to toggle some utilities to make use of
logical property based ones.
This feature should be opt-in to prevent backwards compatibility (e.g.:
RTL sites that _did_ use a mr-4 explicitly).
* update default browserslist
* explicitly include/exclude Lightning CSS features
* update tests based on new browserslist and include/exclude features from Lightning CSS
* update integration tests
* prefer user browserslist, fallback to built-in browserslist
* always include Nesting
If a custom browserslist config is used, then we don't explicitly set
the include/exclude features from Lightning CSS (except for nesting, we
always want to process nesting)
* ensure to fallback to the current working directory
* update changelog
* bump `lightningcss`
* allow for non-standard selector combinators such as `::deep`
* just use Prettier when comparing CSS results
We were using 2 different engines where the stable one was not using
Lightning CSS and the Oxide one was using Lightning CSS.
To ensure that we didn't have to rewrite every single test expectation,
the `toMatchFormattedCss` parsed both the actual and expected value
using Lightning CSS (to make the result similar), then it used Prettier
to make it... pretty.
Right now we _only_ use Lightning CSS, which means that we can drop the
additional lightningcss format step and just use Prettier on both the
actual and expected values.
Pretty also only prettifies the CSS, it doesn't rewrite it. E.g.:
`@media (min-width: 768px)` will not be optimized to `@media (width >=
768px)`, that's something that Lightning CSS does for us.
This will require some changes in our test output, but it will be
consistent afterwards because there won't be hidden transformation steps
anymore. Because up until now it could be that the actual result was
`color: black` but the tests showed `color: #000` (because it is
shorter).
This change will reflect reality.
* update tests based on previous commit
* only use `toMatchFormattedCss` instead of `toMatchCss`
They both do the exact same thing right now. While `toMatchCss` is
shorter, `toMatchFormattedCss` makes a bit more sense since we are
comparing the Prettier results.
* update integration tests
* enable `--no-autoprefixer` test
* handle `--no-autoprefixer` using lightningcss
* bump default chrome version for lightningcss plugin
* handle `map` being nullable
* add `--no-autoprefixer` test including nesting
* set Chrome to version 111 as a default value
* resolve the output message when resolving the promise
* deprecate `--no-autoprefixer` for the CLI
* update changelog
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
* resolve all _existing_ content paths
* pin `@napi-rs/cli`
* WIP: Log all resolved content files/globs
* only filter out raw changed content in non-auto mode
* skip parseCandidateFiles cache in `auto` mode
* improve algorithm of detecting content paths
1. Files in the root should be listed statically instead of using globs.
2. Files and folders in special known direct child folders should be
listed statically instead of using globs (e.g.: `public`). This is
because these special folders are often used to store generated AND
source files at the same time. Using globs could trigger infinite
loops because we are watching and acting upon dist files.
3. All file extensions found in the project, should be used in the globs
in addition to a known set of extensions.
4. Direct folders seen from the root, can use the glob syntax
`<root>/src/**/*.{...known-extensions}`
* inline wanted-extensions
Not 100% convinced yet, but seems cleaner so far.
* ensure writing an file also makes the parent folder(s)
* add integration tests for the auto content feature
* add pnpm and bun lock files
* Revert "inline wanted-extensions"
This reverts commit 879c1248524e84216125f4a24e0160b40736333a.
* sort binary-extensions and add lockb
* sort + add `lock` to ignored extensions
* drop `yarn.lock`, because lock extensions are already covered
* group template extensions
This will make it a bit easier to organize in the future.
* drop empty lines and commented lines from template-extensions
* skip the config path when resolving template files
The config file will automatically trigger a rebuild when this file is
changed. However, this should not be part of the template files because
that could cause additional css that's not being used.
* make `auto content` the default in the oxide engine
- In the oxide engine, the default `content: []` will be dropped from
the default configuration (config.simple.js, config.full.js).
- If you have `content: []` or `content: { files: [] }` then the auto
content feature won't be active. However if those arrays are empty a
warning will still be shown. Adding files/globs or dropping the
`content` section completely will enable auto content.
* only test the auto content integration test in the oxide engine
* set `content.files` to `auto` instead of using `auto: boolean`
This way we don't run into the issue where the `config.content.files` is
set and the `config.content.auto` is set to true.
* drop log
* ensure we validate the config in the CLI
* show experimental warning for automatic content detection
* use cached version of the getCandidateFiles instead of bypassing it
* use `is_empty()` shorthand
Thanks, Clippy!
* add test to ensure nested ignored folders are not scanned
* add `tempfile` for tests
* add auto content tests in Rust
* refactor auto content detection
This will also make sure that if we have (deeply) nested ignored
folders, then we won't use deeply nested globs (**/*.{js,html}) for the
parent(s) of the nested ignored folders but instead use a shallow glob
for each directory (*/*.{js,html}).
Then each sibling directory of the parent can use deeply nested globs
again except for the direct parent.
* use consistent comments
* ensure ignored static listed files are not present
* improve performance by ~30x
On a big test project this goes from ~6s to ~200ms
* improve performance by ~5x
We started with a ~6s duration
Then in the previous commit, we improved it by ~30x and it went down to
~200ms
Now with this change, it takes about ~40ms. That's another ~5x
improvement.
Or in total a ~150x improvement.
* ensure nested folders in `public/` are also explicitly listed
* add shortcut for normalizing files
This is only called once so won't do anything to the main performance of
Tailwind CSS. But always nice to make small performance improvements!
* run Rust tests in CI
* fix lint warnings
* update changelog
* Update CHANGELOG.md
---------
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
* bump `postcss-load-config` in the oxide engine
* bump `postcss-load-config` in the stable engine
* update changelog
* Switch to stable
* Update Node to v14
* Update to latest dependency versions
* Update test helper for new version of `rimraf`
Co-Authored-By: Jordan Pittman <jordan@cryptica.me>
* Downgrade `lightningcss` to `v1.18.0`
Co-Authored-By: Jordan Pittman <jordan@cryptica.me>
* Switch back to oxide
* Update Github actions from Node 12 to Node 14
* Update oxide dependencies
* Update stable dependencies
* Update `content-resolution` integration test dependencies
* Update `postcss-cli` integration test dependencies
* Update `rollup` integration test dependencies
* Update `rollup-sass` integration test dependencies
* Update `vite` integration test dependencies
* Update `webpack-5` integration test dependencies
* Update changelog
* Remove `color-name` dependency
* Replace `quick-lru` dependency with `@alloc/quick-lru`
* Replace `quick-lru` dependency with `@alloc/quick-lru` in stable
* Fix standalone CLI test
---------
Co-authored-by: Jonathan Reinink <jonathan@reinink.ca>
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
* replace `env.OXIDE` with global `__OXIDE__`
This will allow us to replace the `__OXIDE__` at build time, and fully
remove the branches from the final code so that there is not even any
reference to `@tailwindcss/oxide` on the stable engine.
* update changelog
* use `env.ENGINE` in integration tests
* drop oxide branching for the PostCSS plugin for now
This is currently a redirect to the same file, so doesn't hurt.
* Enable better dead-code elimination
* Update CLI tests
Fix indentation
* Fix indentation
---------
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
* try to use `config.default` before using `config`
* update changelog
* add quick `SHOW_OUTPUT` toggle for integration tests
Setting this to `true` shows the output of the executed commands.
* add integration tests for `tailwind.config.ts` and `tailwind.config.js` with ESM syntax
* add `jiti` and `detective-typescript` dependencies
* use `jiti` and `detective-typescript`
Instead of `detective`, this way we will be able to support
`tailwind.config.ts` files and `ESM` files.
* use `@swc/core` instead of the built-in `babel` form `jiti`
* update changelog
* add `jiti` and `detective-typescript` dependencies to `stable`
* use `sucrase` to transform the configs
* add `sucrase` dependency to `stable` engine
* make loading the config easier
* use abstracted loading config utils
* WIP: make `load` related files public API
* use new config loader in PostCSS plugin
* add list of default config files to look for
* cleanup unused arguments
* find default config path when using CLI
* improve `init` command
* make eslint happy
* keep all files in `stubs` folder
* add `tailwind.config.js` stub file
* Initialize PostCSS config using the same format as Tailwind config
* Rename config content stubs to config.*.js
* Improve option descriptions for init options
* Remove unused code, remove `constants` file
* Fix TS warning
* apply CLI changes to the Oxide version
* update `--help` output in CLI tests
* WIP: make tests work on CI
TODO: Test all combinations of `--full`, `--ts`, `--postcss`, and `--esm`.
* wip
* remove unused `fs`
* Fix init tests
Did you know you could pass an empty args to a command? No? Me neither. ¯\_(ツ)_/¯
* bump `napi-derive`
* list extensions we are interested in
* no-op the `removeFile` if file doesn't exist
* ensure all `init` flags work
* ensure we cleanup the new files
* test ESM/CJS generation based on package.json
* remove unnecessary test
We are not displaying output in the `--help` anymore based on whether
`type: module` is present or not.
Therefore this test is unneeded.
* only look for `TypeScript` files when the entryFile is `TypeScript` as well
* refactor `load` to be `loadConfig`
This will allow you to use:
```js
import loadConfig from 'tailwindcss/loadConfig'
let config = loadConfig("/Users/xyz/projects/my-app/tailwind.config.ts")
```
The `loadConfig` function will return the configuration object based on
the given absolute path of a tailwind configuration file.
The given path can be a CJS, an ESM or a TS file.
* use the `config.full.js` stub instead of the `defaultConfig.stub.js` file
The root `defaultConfig` is still there for backwards compatibilty
reasons. But the `module.exports = requrie('./config.full.js')` was
causing some problems when actually using tailwindcss.
So dropped it instead.
* apply `load` -> `loadConfig` changes to `Oxide` engine CLI
* ensure we write the config file in the Oxide engine
* improve type in Oxide engine CLI
* catch errors instead of checking if the file exists
A little smaller but just for tests so doesn't matter too much here 👍
* ensure we publish the correct stub files
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
Co-authored-by: Nate Moore <nate@natemoo.re>
Co-authored-by: Enzo Innocenzi <enzo@innocenzi.dev>
* disable color opacity plugins by default for the `oxide` engine
* update tests to reflect this change in the `oxide` engine
* update changelog
* reflect changes in integration tests
* bump lightningcss
* use `lightningcss` in the main PostCss Plugin
* use lightningcss in our custom matchers
Now that we are using `lightningcss` and nesting in the new `oxide`
engine, the generated output _will_ be different in the majority of test
cases.
Using a combination of `prettier` and `lightningcss` will make the
output consistent.
The moment we are fully using the `oxide` engine, we can drop
`lightningcss` or `prettier` again to improve the performance of the
tests.
* update tests to apply `lightningcss` related changes
* update changelog
* add `lightningcss` and `browserslist` as dev dependencies to stable package.json
* only use `lightningcss` in tests (without prettier)
We will only fallback to prettier if lightningcss fails somehow.
* apply side effect chagnes due to only using lightningcss for tests
* make CI happy (integration tests)
Apply changes to integration tests now that we are using lightningcss
* transform `lightningcss` for Node 12 when running tests
* run prettier on failing tests for `toMatchFormattedCss`
This will result in better diffs because diffs are typically per block
and/or per line. But lightningcss will simplify certain selectors and
the diff won't be as clear.
We will only apply the prettier formatting for failing tests in the diff
view so that diffs are cleaner and we don't pay for the additional
prettier calls when tests pass.
* separate `stable` and `oxide` mode (package.json in this case)
* drop `install` script (we use a workspace now)
* change required engine to 16
* enable OXIDE by default
* ignore generated `oxide` files
* splitup package.json scripts into "public" and "private" scripts
Not ideal of course, but this should make it a tiny bit easier to know
which scripts _you_ as a developer / contributor have to run.
* drop `workspaces` from the `stable` engine
* drop `oxide` related build files from the `stable` engine
* drop `oxide` engine specific dependencies from the `stable` engine
* use the `oxide-node-api-shim` for the `stable` engine
* add little script to swap the engines
* drop `oxide:build` from `turbo` config
* configure `ci` for `stable` and `oxide` engines
- rename `nodejs.yml` -> `ci.yml`
- add `ci-stable.yml` (for stable mode and Node 12)
- ensure to use the `stable` engine in the `ci-stable.yml` workflow
- drop `oxide:___` specific scripts
* rename `release-insiders` to `release-insiders-stable`
This way we will be able to remove all files that contain `stable` once
we are ready.
* rename `release-insiders-oxide` to just `release-insiders`
* cleanup insider related workflows
* rename `release` -> `release-stable`
* rename `release-oxide` -> `release`
* change names of release workflows
* drop `oxide-` prefix from jobs
* inline node versions
* do not use `turbo` for the stable build
Can't use it because we don't have a workspace in the stable build.
* re-rename CI workflow
* encode default engine in relevant `package.json` files
* make Node 12 work
* increase `node-version` matrix
* make release workflows explicit (per engine)
* add `Oxide` to workflow name
* add integration tests for the `oxide` engine
* add integration tests for the `stable` engine
* run `oxide` integrations against node `18`
* run `stable` integration tests against node 18
We should test node 12 for tailwindcss, but integrations itself can run
against a newer version. In fact, we always ran them against node 16.
* use `localhost` instead of `0.0.0.0`
* ensure `webpack-4` works on Node 18
* run relese scripst directly
Instead of going via `npm`. It's a bit nicer and quicker!
* drop unused scripts
* sync package-lock.json
* ensure to generate the plugin list before running `jest`
We _could_ use an `npm run pretest`, but then you can't run `jest`
directly anymore (which is required for some tools like vscode
extensions).
* cleanup npm scripts
* drop pretend comments
* fix typo
* add `build:rust` as a pre-jest run script
* Update rollup to version 3.10.0
* Update Rollup integrations for Rollup 3
Co-authored-by: depfu[bot] <23717796+depfu[bot]@users.noreply.github.com>
Co-authored-by: Jonathan Reinink <jonathan@reinink.ca>
* temporarily disable workflows
* add oxide
Our Rust related parts
* use oxide
- Setup the codebase to be able to use the Rust parts based on an
environment variable: `OXIDE=1`.
- Setup some tests that run both the non-Rust and Rust version in the
same test.
- Sort the candidates in a consistent way, to guarantee the order for
now (especially in tests).
- Reflect sorting related changes in tests.
- Ensure tests run in both the Rust and non-Rust version. (Some tests
are explicitly skipped when using the Rust version since we haven't
implemented those features yet. These include: custom prefix,
transformers and extractors).
- `jest`
-`OXIDE=1 jest`
* remove into_par_iter where it doesn't make sense
* cargo fmt
* wip
* enable tracing based on `DEBUG` env
* improve CI for the Oxide build
* sort test output
This happened because the sorting happens in this branch, but changes
happened on the `master` branch.
* add failing tests
I noticed that some of the tests were failing, and while looking at
them, it happened because the tests were structured like this:
```html
<div
class="
backdrop-filter
backdrop-filter-none
backdrop-blur-lg
backdrop-brightness-50
backdrop-contrast-0
backdrop-grayscale
backdrop-hue-rotate-90
backdrop-invert
backdrop-opacity-75
backdrop-saturate-150
backdrop-sepia
"
></div>
```
This means that the class names themselves eventually end up like this: `backdrop-filter-none\n`
-> (Notice the `\n`)
/cc @thecrypticace
* fix range to include `\n`
* Include only unique values for tests
Really, what we care about most is that the list contains every expected candidate. Not necessarily how many times it shows up because while many candidates will show up A LOT in a source text we’ll unique them before passing them back to anything that needs them
* Fix failing tests
* Don’t match empty arbitrary values
* skip tests in oxide mode regarding custom separators in arbitrary variants
* re-enable workflows
* use `@tailwindcss/oxide` dependency
* publish `tailwindcss@oxide`
* drop prepublishOnly
I don't think we actually need this anymore (or even want because this
is trying to do things in CI that we don't want to happen. Aka, build
the Oxide Rust code, it is already a dependency).
* WIP
* Defer to existing CLI for Oxide
* Include new compiled typescript stuff when publishing
* Move TS to ./src/oxide
* Update scripts
* Clean up tests for TS
* copy `cli` to `oxide/cli`
* make CLI files TypeScript files
* drop --postcss flag
* setup lightningcss
* Remove autoprefixer and cssnano from oxide CLI
* cleanup Rust code a little bit
- Drop commented out code
- Drop 500 fixture templates
* sort test output
* re-add `prepublishOnly` script
* bump SWC dependencies in package-lock.json
* pin `@swc` dependencies
* ensure to install and build oxide
* update all GitHub Workflows to reflect Oxide required changes
* sort `content-resolution` integration tests
* add `Release Insiders — Oxide`
* setup turbo repo + remote caching
* use `npx` to invoke `turbo`
* setup unique/proper package names for integration tests
* add missing `isomorphic-fetch` dependency
* setup integration tests to use `turborepo`
* scope tailwind tasks to root workspace
* re-enable `node_modules` cache for integration tests
* re-enable `node_modules` cache for main CI workflow
* split cache for `main` and `oxide` node_modules
* fix indent
* split install dependencies so that they can be cached individually
* improve GitHub actions caching
* use correct path for oxide node_modules (crates/node)
* ensure that `cargo install` always succeeds
cargo install X, on CI will fail if it already exists.
* figure out integration tests with turbo
* tmp: use `npm` instead of `turbo`
* disable `fail-fast`
This will allow us to run integration tests so that it still caches the
succesful ones.
* YAML OH YAML, Y U WHITESPACE SENSITIVE
* copy the oxide-ci workflow to release-oxide
* make `oxide-ci` a normal CI workflow
Without publishing
* try to cache cargo and node_modules for the oxide build
* configure turbo to run scripts in the root
* explicitly skip failing test for the Oxide version
* run oxide tests in CI
* only use build script for root package
* sync package-lock.json
* do not cache node_modules for each individual integration
* look for hoisted `.bin`
* use turbo for caching build tailwind css in integration tests
* Robin...
* try to use the local binary first
* skip installing integration test dependencies
Should already be installed due to workspace usage
* Robin...
* drop `output.clean`
* explicitly add `mini-css-extract-plugin`
* drop oxide-ci, this is tested by proxy
* ensure oxide build is used in integration tests
This will ensure the `@tailwindcss/oxide` dependency is available
(whether we use it or not).
* setup Oxide shim in insiders release
* add browserslist dependency
* use `install:all` script name
Just using `install` as a script name will be called when running
`npm install`.
Now that we marked the repo as a `workspace`, `npm install` will run
install in all workspaces which is... not ideal.
* tmp: enable insiders release in PRs
Just to check if everything works before merging. Can be removed once
tested.
* don't cache node_modules?
I feel there is some catch 22 going on here.
We require `npm install` to build the `oxide/crates/node` version.
But we also require `oxide/crates/node` for the `npm install` becaus of
the dependency: `"@tailwindcss/oxide": "file:oxide/creates/node"`
* try to use `oxide/crates/node` as part of the workspace
* let's think about this
Let's try and cache the `node_modules` and share as much as possible.
However, some scripts still need to be installed specific to the OS.
Running `npm install` locally doesn't throw away your `node_modules`,
so if we just cache `node_modules` but also run `npm install` that
should keep as much as possible and still improve install times since
`node_modules` is already there.
I think.
* ensure generated `index.js` and `index.d.ts` files are considered outputs
* use `npx napi` instead of `napi` directly
* include all `package-lock.json` files
* normalize caching further in all workflows
* drop nested `package-lock.json` files
* `npm uninstall mini-css-extract-plugin && npm install mini-css-extract-plugin --save-dev`
* bump webpack-5 integration tests dependencies
* only release insiders on `master` branch
* tmp: let's figure out release insiders oxide
* fix little typo
* use Node 18 for Oxide Insiders
* syncup package-lock.json
* let's try node 16
Node 18 currently fails on `Build x86_64-unknown-linux-gnu (OXIDE)`
Workflow.
Install Node.JS output:
```
Environment details
Warning: /__t/node/18.13.0/x64/bin/node: /lib64/libm.so.6: version `GLIBC_2.27' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libc.so.6: version `GLIBC_2.25' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libc.so.6: version `GLIBC_2.28' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by /__t/node/18.13.0/x64/bin/node)
Warning: node: /lib64/libm.so.6: version `GLIBC_2.27' not found (required by node)
node: /lib64/libc.so.6: version `GLIBC_2.25' not found (required by node)
node: /lib64/libc.so.6: version `GLIBC_2.28' not found (required by node)
node: /lib64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by node)
node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by node)
node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by node)
```
* bump some Node versions
* only release oxide insiders on `master` branch
* don't cache `npm`
* bump napi-rs
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
* Record and watch PostCSS dependencies in the CLI
* ensure `changedContent` gets cleared
Otherwise this list gets bigger and bigger, not only that there is a
subtle bug. The moment you save a `.css` file we want to create a new
context and start from scratch. However, since the list was never
cleared, it meant that every subsequent save to *any* file (not only
config / css files) creates a new context...
By clearing the least we should work around this problem.
* add test that verifies an odd bug
The story goes like this:
1. add `underline` to html file
-> css contains `underline` rule
2. add `font-bold` to html file
-> css contains `underline` and `font-bold`
3. remove `underline` from html file
-> css still contains `underline` and `font-bold` for performance reasons
4. Save a css file (! RED FLAG)
-> css contains `font-bold` because we started from scratch
5. add `underline` to html file
-> css contains `underline` and `font-bold`
6. remove `underline` from html file
-> css only contains `font-bold`... (UH OH)
This is because the moment we did step 4, every single save in any file created a new context. Every. Single. Time.
* use a property that doesn't require `autoprefixer`
* update changelog
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
* update changelog
* ensure `--content` is taken into account
* cleanup tests
- Use `rm` instead of deprecated `rmdir`
- Type the returnType correctly
* use a file not included in `content` of your tailwind.config.js file
* Update lockfile
* Tweak formatting
* Refactor content path parsing
* Allow resolving content paths relative to the config file
* Include resolved symlinks as additional content paths
* Update changelog
* Work on suite of tests for content resolution
* reformat integration test list
* Move content resolution tests to integration
* Update future and experimental types
* Add support for postcss-import in watch mode
* Add regression test
* Extract shared logic
* restructure test a little bit
Instead of relying on a arbitrary setTimout value, let's wait for the
file to be created instead.
* update changelog
Co-authored-by: Adam Bergman <adam@fransvilhelm.com>
* Add content glob integration tests
* Use tagged version in parcel integration tests
* Upgrade postcss-cli integration tests
* upgrade integration test deps
* Fix CS
* Fix tests
* Update lockfile
* Fix vite test in CI
* add generate-types script
This script will generate the full list of core plugins, which will
allow you to get code completion for the `corePlugins` section.
It will also generate all the colors (and deprecated colors) which is
used in multiple places in the config.
* add types for the `tailwind.config.js` config file
* annotate stubs with a JSDoc pointing to the types
* add types to package.json
- Updated the files to make sure that the types are being published
- Add a `types` section in the `package.json`, otherwise your editor by
default will look for the `DefinitelyTyped` types which got me really
confused for a second.
- Added some scripts to make sure that the generation of types happens
when needed (before tests and before building). This way you never
ever have to think about generating them when working on Tailwind CSS
internals.
* re-export types top-level
Having a `colors.d.ts` next to the `colors.js` file allows us to type
the `colors.js` file and your editor will pickup the types from
`colors.d.ts`.
* also publish generated types
* update changelog
* enable TypeScript only when using `init --types` for now
* update tests to verify that `--types` works
* add prettier-plugin-tailwindcss
This will use the prettier plugin in our tests as well, yay consistency!
* ensure that both `group` and `peer` can't be used in `@apply`
This was only configured for `group`
* expose `sortClassList` on the context
This function will be used by the `prettier-plugin-tailwindcss` plugin,
this way the sorting happens within Tailwind CSS itself adn the
`prettier-plugin-tailwindcss` plugin doesn't have to use internal /
private APIs.
The signature looks like this:
```ts
function sortClassList(classes: string[]): string[]
```
E.g.:
```js
let sortedClasses = context.sortClassList(['p-1', 'm-1', 'container'])
```
* update changelog
* add sort test for utilities with the important modifier e.g.: `!p-4`
