* bump `lightningcss`
* allow for non-standard selector combinators such as `::deep`
* just use Prettier when comparing CSS results
We were using 2 different engines where the stable one was not using
Lightning CSS and the Oxide one was using Lightning CSS.
To ensure that we didn't have to rewrite every single test expectation,
the `toMatchFormattedCss` parsed both the actual and expected value
using Lightning CSS (to make the result similar), then it used Prettier
to make it... pretty.
Right now we _only_ use Lightning CSS, which means that we can drop the
additional lightningcss format step and just use Prettier on both the
actual and expected values.
Pretty also only prettifies the CSS, it doesn't rewrite it. E.g.:
`@media (min-width: 768px)` will not be optimized to `@media (width >=
768px)`, that's something that Lightning CSS does for us.
This will require some changes in our test output, but it will be
consistent afterwards because there won't be hidden transformation steps
anymore. Because up until now it could be that the actual result was
`color: black` but the tests showed `color: #000` (because it is
shorter).
This change will reflect reality.
* update tests based on previous commit
* only use `toMatchFormattedCss` instead of `toMatchCss`
They both do the exact same thing right now. While `toMatchCss` is
shorter, `toMatchFormattedCss` makes a bit more sense since we are
comparing the Prettier results.
* update integration tests
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
* add `listStyle` instead of `listStyleType`
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
* add `listStyleType` related deprecation warnings
* Implement list-style-image as separate plugin
* Remove unused code, update tests
* Always generate `list-none`, don't pull it from theme
* Gracefully handle missing listStyleType configuration
* Just use `list-image-*` fuck it
* Update changelog
---------
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
Co-authored-by: Peter Neupauer <peter@neupauer.sk>
* disable color opacity plugins by default for the `oxide` engine
* update tests to reflect this change in the `oxide` engine
* update changelog
* reflect changes in integration tests
* Revert "add caption-side utilities (#10470)"
This reverts commit f395cc4ae5.
* Revert "Add support for configuring default `font-variation-settings` for a `font-family` (#10515)"
This reverts commit 8bd2846b5b.
* Revert "feat: add hyphens (#10071)"
This reverts commit f58a43fd75.
* Revert "Add logical properties support for inline direction"
* Revert "Add `delay-0` and `duration-0` by default"
* Revert "Support using variables as arbitrary values without `var()`"
* Revert "Add `line-height` modifier support to `font-size` utilities"
* drop empty lines when diffing output
* replace expected css with optimized lightningcss output
Lightning CSS generates a more optimal CSS output.
Right now the tests are setup in a way that both the generated css and
expected css are run through `lightningcss` to make sure that the output
is concistent for the `stable` and `oxide` engines. But this also means
that the expected output _could_ be larger (aka not optimized) and still
matches (after it runs through lightningcss).
By replacing this with the more optimal output we achieve a few things:
1. This better reflects reality since we will be using `lightningcss`.
2. This gets rid of unnecessary css.
3. Removed code!
* bump lightningcss
* use `lightningcss` in the main PostCss Plugin
* use lightningcss in our custom matchers
Now that we are using `lightningcss` and nesting in the new `oxide`
engine, the generated output _will_ be different in the majority of test
cases.
Using a combination of `prettier` and `lightningcss` will make the
output consistent.
The moment we are fully using the `oxide` engine, we can drop
`lightningcss` or `prettier` again to improve the performance of the
tests.
* update tests to apply `lightningcss` related changes
* update changelog
* add `lightningcss` and `browserslist` as dev dependencies to stable package.json
* only use `lightningcss` in tests (without prettier)
We will only fallback to prettier if lightningcss fails somehow.
* apply side effect chagnes due to only using lightningcss for tests
* make CI happy (integration tests)
Apply changes to integration tests now that we are using lightningcss
* transform `lightningcss` for Node 12 when running tests
* run prettier on failing tests for `toMatchFormattedCss`
This will result in better diffs because diffs are typically per block
and/or per line. But lightningcss will simplify certain selectors and
the diff won't be as clear.
We will only apply the prettier formatting for failing tests in the diff
view so that diffs are cleaner and we don't pay for the additional
prettier calls when tests pass.
* Handle group/peer variants with quoted strings
* Fix CS
* Use `splitAtTopLevelOnly` instead
This solution isn’t that pretty but it is reusing existing machinery
* inline return
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
* Fix return type
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
* Fixup
* Update changelog
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
* Run test suite against both engines
* make eslint happy
* only run `stable` tests on Node 12
* use normal expectation instead of snapshot file
When we run the tests only against `stable` (for node 12), then the
snapshots exists for the `Oxide` build. They are marked as `obsolete`
and will cause the `npm run test` script to fail. Sadly.
Inlined them for now, but ideally we make those tests more blackbox-y so
that we test that we get source maps and that we can map the sourcemap
back to the input files (without looking at the actual annotations).
* properly indent inline css
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
This will reduce the amount of different test "implementations" and
should further unify/normalise the tests. Some tests are very large and
can be split up more but this is a start in the right direction.
One of the biggest benefits is that changes in the tests file re-trigger
a jest run in watch mode. A change in the HTML/CSS file won't.
* ensure we use `npm@7` for older versions of Node.js
This is important so that we can guarantee that `workspaces` are
supported which we depend on right now (just for install purposes).
* tmp: trigger CI build (GitHub is doing funky things and not working right now)
* drop Node.js 12 from Node.js CI workflow
* focus on Node.js 16 for now
* Revert "tmp: trigger CI build (GitHub is doing funky things and not working right now)"
This reverts commit a3deed472d.
* WIP
* Add support for logical properties in inline direction
* Add scroll-margin/scroll-padding utilities
* Update CHANGELOG
* Rename inset-s/e to start/end
* Update sort order in test
* Use logical properties for space/divide in Oxide
* run non-oxide and OXIDE tests
+ fix oxide version tests
* drop oxide specific test job
The normal `npm run test` will already include the non-oxide and oxide
version when running tests.
Co-authored-by: Robin Malfait <malfait.robin@gmail.com>
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
* temporarily disable workflows
* add oxide
Our Rust related parts
* use oxide
- Setup the codebase to be able to use the Rust parts based on an
environment variable: `OXIDE=1`.
- Setup some tests that run both the non-Rust and Rust version in the
same test.
- Sort the candidates in a consistent way, to guarantee the order for
now (especially in tests).
- Reflect sorting related changes in tests.
- Ensure tests run in both the Rust and non-Rust version. (Some tests
are explicitly skipped when using the Rust version since we haven't
implemented those features yet. These include: custom prefix,
transformers and extractors).
- `jest`
-`OXIDE=1 jest`
* remove into_par_iter where it doesn't make sense
* cargo fmt
* wip
* enable tracing based on `DEBUG` env
* improve CI for the Oxide build
* sort test output
This happened because the sorting happens in this branch, but changes
happened on the `master` branch.
* add failing tests
I noticed that some of the tests were failing, and while looking at
them, it happened because the tests were structured like this:
```html
<div
class="
backdrop-filter
backdrop-filter-none
backdrop-blur-lg
backdrop-brightness-50
backdrop-contrast-0
backdrop-grayscale
backdrop-hue-rotate-90
backdrop-invert
backdrop-opacity-75
backdrop-saturate-150
backdrop-sepia
"
></div>
```
This means that the class names themselves eventually end up like this: `backdrop-filter-none\n`
-> (Notice the `\n`)
/cc @thecrypticace
* fix range to include `\n`
* Include only unique values for tests
Really, what we care about most is that the list contains every expected candidate. Not necessarily how many times it shows up because while many candidates will show up A LOT in a source text we’ll unique them before passing them back to anything that needs them
* Fix failing tests
* Don’t match empty arbitrary values
* skip tests in oxide mode regarding custom separators in arbitrary variants
* re-enable workflows
* use `@tailwindcss/oxide` dependency
* publish `tailwindcss@oxide`
* drop prepublishOnly
I don't think we actually need this anymore (or even want because this
is trying to do things in CI that we don't want to happen. Aka, build
the Oxide Rust code, it is already a dependency).
* WIP
* Defer to existing CLI for Oxide
* Include new compiled typescript stuff when publishing
* Move TS to ./src/oxide
* Update scripts
* Clean up tests for TS
* copy `cli` to `oxide/cli`
* make CLI files TypeScript files
* drop --postcss flag
* setup lightningcss
* Remove autoprefixer and cssnano from oxide CLI
* cleanup Rust code a little bit
- Drop commented out code
- Drop 500 fixture templates
* sort test output
* re-add `prepublishOnly` script
* bump SWC dependencies in package-lock.json
* pin `@swc` dependencies
* ensure to install and build oxide
* update all GitHub Workflows to reflect Oxide required changes
* sort `content-resolution` integration tests
* add `Release Insiders — Oxide`
* setup turbo repo + remote caching
* use `npx` to invoke `turbo`
* setup unique/proper package names for integration tests
* add missing `isomorphic-fetch` dependency
* setup integration tests to use `turborepo`
* scope tailwind tasks to root workspace
* re-enable `node_modules` cache for integration tests
* re-enable `node_modules` cache for main CI workflow
* split cache for `main` and `oxide` node_modules
* fix indent
* split install dependencies so that they can be cached individually
* improve GitHub actions caching
* use correct path for oxide node_modules (crates/node)
* ensure that `cargo install` always succeeds
cargo install X, on CI will fail if it already exists.
* figure out integration tests with turbo
* tmp: use `npm` instead of `turbo`
* disable `fail-fast`
This will allow us to run integration tests so that it still caches the
succesful ones.
* YAML OH YAML, Y U WHITESPACE SENSITIVE
* copy the oxide-ci workflow to release-oxide
* make `oxide-ci` a normal CI workflow
Without publishing
* try to cache cargo and node_modules for the oxide build
* configure turbo to run scripts in the root
* explicitly skip failing test for the Oxide version
* run oxide tests in CI
* only use build script for root package
* sync package-lock.json
* do not cache node_modules for each individual integration
* look for hoisted `.bin`
* use turbo for caching build tailwind css in integration tests
* Robin...
* try to use the local binary first
* skip installing integration test dependencies
Should already be installed due to workspace usage
* Robin...
* drop `output.clean`
* explicitly add `mini-css-extract-plugin`
* drop oxide-ci, this is tested by proxy
* ensure oxide build is used in integration tests
This will ensure the `@tailwindcss/oxide` dependency is available
(whether we use it or not).
* setup Oxide shim in insiders release
* add browserslist dependency
* use `install:all` script name
Just using `install` as a script name will be called when running
`npm install`.
Now that we marked the repo as a `workspace`, `npm install` will run
install in all workspaces which is... not ideal.
* tmp: enable insiders release in PRs
Just to check if everything works before merging. Can be removed once
tested.
* don't cache node_modules?
I feel there is some catch 22 going on here.
We require `npm install` to build the `oxide/crates/node` version.
But we also require `oxide/crates/node` for the `npm install` becaus of
the dependency: `"@tailwindcss/oxide": "file:oxide/creates/node"`
* try to use `oxide/crates/node` as part of the workspace
* let's think about this
Let's try and cache the `node_modules` and share as much as possible.
However, some scripts still need to be installed specific to the OS.
Running `npm install` locally doesn't throw away your `node_modules`,
so if we just cache `node_modules` but also run `npm install` that
should keep as much as possible and still improve install times since
`node_modules` is already there.
I think.
* ensure generated `index.js` and `index.d.ts` files are considered outputs
* use `npx napi` instead of `napi` directly
* include all `package-lock.json` files
* normalize caching further in all workflows
* drop nested `package-lock.json` files
* `npm uninstall mini-css-extract-plugin && npm install mini-css-extract-plugin --save-dev`
* bump webpack-5 integration tests dependencies
* only release insiders on `master` branch
* tmp: let's figure out release insiders oxide
* fix little typo
* use Node 18 for Oxide Insiders
* syncup package-lock.json
* let's try node 16
Node 18 currently fails on `Build x86_64-unknown-linux-gnu (OXIDE)`
Workflow.
Install Node.JS output:
```
Environment details
Warning: /__t/node/18.13.0/x64/bin/node: /lib64/libm.so.6: version `GLIBC_2.27' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libc.so.6: version `GLIBC_2.25' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libc.so.6: version `GLIBC_2.28' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by /__t/node/18.13.0/x64/bin/node)
Warning: node: /lib64/libm.so.6: version `GLIBC_2.27' not found (required by node)
node: /lib64/libc.so.6: version `GLIBC_2.25' not found (required by node)
node: /lib64/libc.so.6: version `GLIBC_2.28' not found (required by node)
node: /lib64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by node)
node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by node)
node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by node)
```
* bump some Node versions
* only release oxide insiders on `master` branch
* don't cache `npm`
* bump napi-rs
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
* Handle escaped selector characters in parseVariantFormatString
* Escape group names in selectors
Otherwise special characters would break O_O
* Update changelog
This would be better as a symbol but the stringy-ness of class candidates is fairly well baked into assumptions across the codebase. Using `new String` with a well placed check seems to solve the problem.
* remove early return so that all plugins are handled
We had an early return so that once a plugin was matched, that we could
stop running the code through the other plugins. However, in this case
we have an issue that user defined css is technically also a plugin.
This means that:
- `bg-green-light`
Would check for:
- `bg-green-light` (no hit, continue)
- `bg-green` (Hit! Don't execute next plugins)
- `bg` (This is the one that would have generated `bg-green-light`)
We tested this change and it doesn't seem to have an impact functionally
and also not really performance wise.
* update changelog
* move `./tests/jit` to `./tests`
* make tests consistent
Abstracted a `run` function and some syntax highlighting helpers for
`html`, `css` and `javascript`.
2021-09-03 13:48:16 +02:00
Renamed from tests/jit/basic-usage.test.js (Browse further)
