* exclude `Features.LogicalProperties` lightningcss feature
We don't want this to automatically apply since we have dedicated
logical property based utilities already.
We also have a feature flag to toggle some utilities to make use of
logical property based ones.
This feature should be opt-in to prevent backwards compatibility (e.g.:
RTL sites that _did_ use a mr-4 explicitly).
* update default browserslist
* explicitly include/exclude Lightning CSS features
* update tests based on new browserslist and include/exclude features from Lightning CSS
* update integration tests
* prefer user browserslist, fallback to built-in browserslist
* always include Nesting
If a custom browserslist config is used, then we don't explicitly set
the include/exclude features from Lightning CSS (except for nesting, we
always want to process nesting)
* ensure to fallback to the current working directory
* update changelog
* bump `lightningcss`
* allow for non-standard selector combinators such as `::deep`
* just use Prettier when comparing CSS results
We were using 2 different engines where the stable one was not using
Lightning CSS and the Oxide one was using Lightning CSS.
To ensure that we didn't have to rewrite every single test expectation,
the `toMatchFormattedCss` parsed both the actual and expected value
using Lightning CSS (to make the result similar), then it used Prettier
to make it... pretty.
Right now we _only_ use Lightning CSS, which means that we can drop the
additional lightningcss format step and just use Prettier on both the
actual and expected values.
Pretty also only prettifies the CSS, it doesn't rewrite it. E.g.:
`@media (min-width: 768px)` will not be optimized to `@media (width >=
768px)`, that's something that Lightning CSS does for us.
This will require some changes in our test output, but it will be
consistent afterwards because there won't be hidden transformation steps
anymore. Because up until now it could be that the actual result was
`color: black` but the tests showed `color: #000` (because it is
shorter).
This change will reflect reality.
* update tests based on previous commit
* only use `toMatchFormattedCss` instead of `toMatchCss`
They both do the exact same thing right now. While `toMatchCss` is
shorter, `toMatchFormattedCss` makes a bit more sense since we are
comparing the Prettier results.
* update integration tests
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
* bump `postcss-load-config` in the oxide engine
* bump `postcss-load-config` in the stable engine
* update changelog
* Switch to stable
* Update Node to v14
* Update to latest dependency versions
* Update test helper for new version of `rimraf`
Co-Authored-By: Jordan Pittman <jordan@cryptica.me>
* Downgrade `lightningcss` to `v1.18.0`
Co-Authored-By: Jordan Pittman <jordan@cryptica.me>
* Switch back to oxide
* Update Github actions from Node 12 to Node 14
* Update oxide dependencies
* Update stable dependencies
* Update `content-resolution` integration test dependencies
* Update `postcss-cli` integration test dependencies
* Update `rollup` integration test dependencies
* Update `rollup-sass` integration test dependencies
* Update `vite` integration test dependencies
* Update `webpack-5` integration test dependencies
* Update changelog
* Remove `color-name` dependency
* Replace `quick-lru` dependency with `@alloc/quick-lru`
* Replace `quick-lru` dependency with `@alloc/quick-lru` in stable
* Fix standalone CLI test
---------
Co-authored-by: Jonathan Reinink <jonathan@reinink.ca>
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
* replace `env.OXIDE` with global `__OXIDE__`
This will allow us to replace the `__OXIDE__` at build time, and fully
remove the branches from the final code so that there is not even any
reference to `@tailwindcss/oxide` on the stable engine.
* update changelog
* use `env.ENGINE` in integration tests
* drop oxide branching for the PostCSS plugin for now
This is currently a redirect to the same file, so doesn't hurt.
* Enable better dead-code elimination
* Update CLI tests
Fix indentation
* Fix indentation
---------
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
* disable color opacity plugins by default for the `oxide` engine
* update tests to reflect this change in the `oxide` engine
* update changelog
* reflect changes in integration tests
* bump lightningcss
* use `lightningcss` in the main PostCss Plugin
* use lightningcss in our custom matchers
Now that we are using `lightningcss` and nesting in the new `oxide`
engine, the generated output _will_ be different in the majority of test
cases.
Using a combination of `prettier` and `lightningcss` will make the
output consistent.
The moment we are fully using the `oxide` engine, we can drop
`lightningcss` or `prettier` again to improve the performance of the
tests.
* update tests to apply `lightningcss` related changes
* update changelog
* add `lightningcss` and `browserslist` as dev dependencies to stable package.json
* only use `lightningcss` in tests (without prettier)
We will only fallback to prettier if lightningcss fails somehow.
* apply side effect chagnes due to only using lightningcss for tests
* make CI happy (integration tests)
Apply changes to integration tests now that we are using lightningcss
* transform `lightningcss` for Node 12 when running tests
* run prettier on failing tests for `toMatchFormattedCss`
This will result in better diffs because diffs are typically per block
and/or per line. But lightningcss will simplify certain selectors and
the diff won't be as clear.
We will only apply the prettier formatting for failing tests in the diff
view so that diffs are cleaner and we don't pay for the additional
prettier calls when tests pass.
* temporarily disable workflows
* add oxide
Our Rust related parts
* use oxide
- Setup the codebase to be able to use the Rust parts based on an
environment variable: `OXIDE=1`.
- Setup some tests that run both the non-Rust and Rust version in the
same test.
- Sort the candidates in a consistent way, to guarantee the order for
now (especially in tests).
- Reflect sorting related changes in tests.
- Ensure tests run in both the Rust and non-Rust version. (Some tests
are explicitly skipped when using the Rust version since we haven't
implemented those features yet. These include: custom prefix,
transformers and extractors).
- `jest`
-`OXIDE=1 jest`
* remove into_par_iter where it doesn't make sense
* cargo fmt
* wip
* enable tracing based on `DEBUG` env
* improve CI for the Oxide build
* sort test output
This happened because the sorting happens in this branch, but changes
happened on the `master` branch.
* add failing tests
I noticed that some of the tests were failing, and while looking at
them, it happened because the tests were structured like this:
```html
<div
class="
backdrop-filter
backdrop-filter-none
backdrop-blur-lg
backdrop-brightness-50
backdrop-contrast-0
backdrop-grayscale
backdrop-hue-rotate-90
backdrop-invert
backdrop-opacity-75
backdrop-saturate-150
backdrop-sepia
"
></div>
```
This means that the class names themselves eventually end up like this: `backdrop-filter-none\n`
-> (Notice the `\n`)
/cc @thecrypticace
* fix range to include `\n`
* Include only unique values for tests
Really, what we care about most is that the list contains every expected candidate. Not necessarily how many times it shows up because while many candidates will show up A LOT in a source text we’ll unique them before passing them back to anything that needs them
* Fix failing tests
* Don’t match empty arbitrary values
* skip tests in oxide mode regarding custom separators in arbitrary variants
* re-enable workflows
* use `@tailwindcss/oxide` dependency
* publish `tailwindcss@oxide`
* drop prepublishOnly
I don't think we actually need this anymore (or even want because this
is trying to do things in CI that we don't want to happen. Aka, build
the Oxide Rust code, it is already a dependency).
* WIP
* Defer to existing CLI for Oxide
* Include new compiled typescript stuff when publishing
* Move TS to ./src/oxide
* Update scripts
* Clean up tests for TS
* copy `cli` to `oxide/cli`
* make CLI files TypeScript files
* drop --postcss flag
* setup lightningcss
* Remove autoprefixer and cssnano from oxide CLI
* cleanup Rust code a little bit
- Drop commented out code
- Drop 500 fixture templates
* sort test output
* re-add `prepublishOnly` script
* bump SWC dependencies in package-lock.json
* pin `@swc` dependencies
* ensure to install and build oxide
* update all GitHub Workflows to reflect Oxide required changes
* sort `content-resolution` integration tests
* add `Release Insiders — Oxide`
* setup turbo repo + remote caching
* use `npx` to invoke `turbo`
* setup unique/proper package names for integration tests
* add missing `isomorphic-fetch` dependency
* setup integration tests to use `turborepo`
* scope tailwind tasks to root workspace
* re-enable `node_modules` cache for integration tests
* re-enable `node_modules` cache for main CI workflow
* split cache for `main` and `oxide` node_modules
* fix indent
* split install dependencies so that they can be cached individually
* improve GitHub actions caching
* use correct path for oxide node_modules (crates/node)
* ensure that `cargo install` always succeeds
cargo install X, on CI will fail if it already exists.
* figure out integration tests with turbo
* tmp: use `npm` instead of `turbo`
* disable `fail-fast`
This will allow us to run integration tests so that it still caches the
succesful ones.
* YAML OH YAML, Y U WHITESPACE SENSITIVE
* copy the oxide-ci workflow to release-oxide
* make `oxide-ci` a normal CI workflow
Without publishing
* try to cache cargo and node_modules for the oxide build
* configure turbo to run scripts in the root
* explicitly skip failing test for the Oxide version
* run oxide tests in CI
* only use build script for root package
* sync package-lock.json
* do not cache node_modules for each individual integration
* look for hoisted `.bin`
* use turbo for caching build tailwind css in integration tests
* Robin...
* try to use the local binary first
* skip installing integration test dependencies
Should already be installed due to workspace usage
* Robin...
* drop `output.clean`
* explicitly add `mini-css-extract-plugin`
* drop oxide-ci, this is tested by proxy
* ensure oxide build is used in integration tests
This will ensure the `@tailwindcss/oxide` dependency is available
(whether we use it or not).
* setup Oxide shim in insiders release
* add browserslist dependency
* use `install:all` script name
Just using `install` as a script name will be called when running
`npm install`.
Now that we marked the repo as a `workspace`, `npm install` will run
install in all workspaces which is... not ideal.
* tmp: enable insiders release in PRs
Just to check if everything works before merging. Can be removed once
tested.
* don't cache node_modules?
I feel there is some catch 22 going on here.
We require `npm install` to build the `oxide/crates/node` version.
But we also require `oxide/crates/node` for the `npm install` becaus of
the dependency: `"@tailwindcss/oxide": "file:oxide/creates/node"`
* try to use `oxide/crates/node` as part of the workspace
* let's think about this
Let's try and cache the `node_modules` and share as much as possible.
However, some scripts still need to be installed specific to the OS.
Running `npm install` locally doesn't throw away your `node_modules`,
so if we just cache `node_modules` but also run `npm install` that
should keep as much as possible and still improve install times since
`node_modules` is already there.
I think.
* ensure generated `index.js` and `index.d.ts` files are considered outputs
* use `npx napi` instead of `napi` directly
* include all `package-lock.json` files
* normalize caching further in all workflows
* drop nested `package-lock.json` files
* `npm uninstall mini-css-extract-plugin && npm install mini-css-extract-plugin --save-dev`
* bump webpack-5 integration tests dependencies
* only release insiders on `master` branch
* tmp: let's figure out release insiders oxide
* fix little typo
* use Node 18 for Oxide Insiders
* syncup package-lock.json
* let's try node 16
Node 18 currently fails on `Build x86_64-unknown-linux-gnu (OXIDE)`
Workflow.
Install Node.JS output:
```
Environment details
Warning: /__t/node/18.13.0/x64/bin/node: /lib64/libm.so.6: version `GLIBC_2.27' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libc.so.6: version `GLIBC_2.25' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libc.so.6: version `GLIBC_2.28' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /__t/node/18.13.0/x64/bin/node)
/__t/node/18.13.0/x64/bin/node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by /__t/node/18.13.0/x64/bin/node)
Warning: node: /lib64/libm.so.6: version `GLIBC_2.27' not found (required by node)
node: /lib64/libc.so.6: version `GLIBC_2.25' not found (required by node)
node: /lib64/libc.so.6: version `GLIBC_2.28' not found (required by node)
node: /lib64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by node)
node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by node)
node: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by node)
```
* bump some Node versions
* only release oxide insiders on `master` branch
* don't cache `npm`
* bump napi-rs
Co-authored-by: Jordan Pittman <jordan@cryptica.me>
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
* Add content glob integration tests
* Use tagged version in parcel integration tests
* Upgrade postcss-cli integration tests
* upgrade integration test deps
* Fix CS
* Fix tests
* Update lockfile
* Fix vite test in CI
* add prettier-plugin-tailwindcss
This will use the prettier plugin in our tests as well, yay consistency!
* ensure that both `group` and `peer` can't be used in `@apply`
This was only configured for `group`
* expose `sortClassList` on the context
This function will be used by the `prettier-plugin-tailwindcss` plugin,
this way the sorting happens within Tailwind CSS itself adn the
`prettier-plugin-tailwindcss` plugin doesn't have to use internal /
private APIs.
The signature looks like this:
```ts
function sortClassList(classes: string[]): string[]
```
E.g.:
```js
let sortedClasses = context.sortClassList(['p-1', 'm-1', 'container'])
```
* update changelog
* add sort test for utilities with the important modifier e.g.: `!p-4`
* use String.raw for css escapes
This will allow us to write code like:
```css
.mobile\:font-bold {}
```
Instead of
```css
.mobile\\:font-bold {}
```
Which resembles "real" css way better in our tests.
* use String.raw in integration tests as well
* setup integration tests
* fix rgb color syntax
* ensure integration tests always exit
If for any reason the integration tests fail, then it will run forever
on CI (~2hours or something). The `--forceExit` is not ideal but it will
prevent long running processes.
* fix incorrect test
We were never properly waiting for the command to finish.
* handle AbortError properly
In CI, when an AbortController gets aborted an error is thrown
(AbortError). If we don't catch it properly then it will "leak" and the
test will fail.
* improve IO functions
* quit integration tests after 10seconds
* only test a few integrations
* test all integrations using matrix
This will cancel other builds when one fails, it will also separate the
output per integration which can be useful especially now that we are
still figuring things out.
* rename `build` to `test`
* add --verbose flag to receive output in the console
* when reading stdout or stderr, wait a certain about to ensure stability
Debouncing for 200ms means that if another message comes in within those
200ms we delay the execution of the callback.
* simplify workflow
* use terminal output instead of disk events
* cache node_modules for integrations
* empty commit, to test cache hits
* make `jit` mode the default when no mode is specified
* unify JIT and AOT codepaths
* ensure `Object.entries` on undefined doesn't break
It could be that sometimes you don't have values in your config (e.g.: `presets: []`), this in turn will break some plugins where we assume we have a value.
* drop AOT specific tests
These tests are all covered by JIT mode already and were AOT specific.
* simplify tests, and add a few
Some of the tests were written for AOT specifically, some were missing. We also updated the way we write those tests, essentially making Tailwind a blackbox, by testing against the final output.
Now that JIT mode is the default, this is super fast because we only generate what is used, instead of partially testing in a 3MB file or building it all, then purging.
* add some todo's to make sure we warn in a few cases
* make `darkMode: 'media'`, the default
This also includes moving dark mode tests to its own dedicated file.
* remove PostCSS 7 compat mode
* update CLI to be JIT-first
* fix integration tests
This is not a _real_ fix, but it does solve the broken test for now.
* warn when using @responsive or @variants
* remove the JIT preview warning
* remove AOT-only code paths
* remove all `mode: 'jit'` blocks
Also remove `variants: {}` since they are not useful in `JIT` mode
anymore.
* drop unused dependencies
* rename `purge` to `content`
* remove static CDN builds
* mark `--purge` as deprecated in the CLI
This will still work, but a warning will be printed and it won't show up
in the `--help` output.
* cleanup nesting plugin
We don't have to duplicate it anymore since there is no PostCSS 7
version anymore.
* make sure integration tests run in band
* cleanup folder structure
* make sure nesting folder is available
* simplify resolving of purge/content information
* add integration test tools
* setup jest in the integrations folder
* add `test:integrations` script
The default `npm test` script will ignore all the tests in the
`integrations` folder.
* add integration tests with `webpack 5`
* add integration tests with `postcss-cli`
* add `npm run install:integrations` script
This script will run `npm install` in every integration, and in the
integrations folder itself (to setup Jest for example).
* add `toIncludeCss` custom matcher
* increate Jest timeout for integration tests
* add integration tests with `vite`
* add integration tests with `webpack 4`
* add isomorphic fetch
* add the ability to wait for specific stdout/stderr output
* write vite tests, assert using API calls
We will wait for the correct stdout/stderr output, once we know that we
can request the fresh css, we will fetch it and make assertions
accordingly.
Port is currently hardcoded, maybe we should use a packaage to ensure
that we use a free port.
* add integration tests with `rollup`
* add integration tests with `parcel`
* run all integration tests in band
* add .gitignore in integrations folder
