2023-01-03 09:40:47 -05:00
|
|
|
import { finalizeSelector } from '../src/util/formatVariantSelector'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to add a simple variant to a simple selector', () => {
|
|
|
|
|
let selector = '.text-center'
|
|
|
|
|
let candidate = 'hover:text-center'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [{ format: '&:hover', isArbitraryVariant: false }]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual('.hover\\:text-center:hover')
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to add a multiple simple variants to a simple selector', () => {
|
|
|
|
|
let selector = '.text-center'
|
|
|
|
|
let candidate = 'focus:hover:text-center'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [
|
|
|
|
|
{ format: '&:hover', isArbitraryVariant: false },
|
|
|
|
|
{ format: '&:focus', isArbitraryVariant: false },
|
|
|
|
|
]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.focus\\:hover\\:text-center:hover:focus'
|
|
|
|
|
)
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to add a simple variant to a selector containing escaped parts', () => {
|
|
|
|
|
let selector = '.bg-\\[rgba\\(0\\,0\\,0\\)\\]'
|
|
|
|
|
let candidate = 'hover:bg-[rgba(0,0,0)]'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [{ format: '&:hover', isArbitraryVariant: false }]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.hover\\:bg-\\[rgba\\(0\\2c 0\\2c 0\\)\\]:hover'
|
|
|
|
|
)
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to add a simple variant to a selector containing escaped parts (escape is slightly different)', () => {
|
|
|
|
|
let selector = '.bg-\\[rgba\\(0\\2c 0\\2c 0\\)\\]'
|
|
|
|
|
let candidate = 'hover:bg-[rgba(0,0,0)]'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [{ format: '&:hover', isArbitraryVariant: false }]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.hover\\:bg-\\[rgba\\(0\\2c 0\\2c 0\\)\\]:hover'
|
|
|
|
|
)
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to add a simple variant to a more complex selector', () => {
|
|
|
|
|
let selector = '.space-x-4 > :not([hidden]) ~ :not([hidden])'
|
|
|
|
|
let candidate = 'hover:space-x-4'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [{ format: '&:hover', isArbitraryVariant: false }]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.hover\\:space-x-4:hover > :not([hidden]) ~ :not([hidden])'
|
|
|
|
|
)
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to add multiple simple variants to a more complex selector', () => {
|
|
|
|
|
let selector = '.space-x-4 > :not([hidden]) ~ :not([hidden])'
|
|
|
|
|
let candidate = 'disabled:focus:hover:space-x-4'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [
|
|
|
|
|
{ format: '&:hover', isArbitraryVariant: false },
|
|
|
|
|
{ format: '&:focus', isArbitraryVariant: false },
|
|
|
|
|
{ format: '&:disabled', isArbitraryVariant: false },
|
|
|
|
|
]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.disabled\\:focus\\:hover\\:space-x-4:hover:focus:disabled > :not([hidden]) ~ :not([hidden])'
|
|
|
|
|
)
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to add a single merge variant to a simple selector', () => {
|
|
|
|
|
let selector = '.text-center'
|
|
|
|
|
let candidate = 'group-hover:text-center'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [{ format: ':merge(.group):hover &', isArbitraryVariant: false }]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.group:hover .group-hover\\:text-center'
|
|
|
|
|
)
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to add multiple merge variants to a simple selector', () => {
|
|
|
|
|
let selector = '.text-center'
|
|
|
|
|
let candidate = 'group-focus:group-hover:text-center'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [
|
|
|
|
|
{ format: ':merge(.group):hover &', isArbitraryVariant: false },
|
|
|
|
|
{ format: ':merge(.group):focus &', isArbitraryVariant: false },
|
|
|
|
|
]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.group:focus:hover .group-focus\\:group-hover\\:text-center'
|
|
|
|
|
)
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to add a single merge variant to a more complex selector', () => {
|
|
|
|
|
let selector = '.space-x-4 ~ :not([hidden]) ~ :not([hidden])'
|
|
|
|
|
let candidate = 'group-hover:space-x-4'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [{ format: ':merge(.group):hover &', isArbitraryVariant: false }]
|
2023-01-03 09:40:47 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.group:hover .group-hover\\:space-x-4 ~ :not([hidden]) ~ :not([hidden])'
|
|
|
|
|
)
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to add multiple merge variants to a more complex selector', () => {
|
|
|
|
|
let selector = '.space-x-4 ~ :not([hidden]) ~ :not([hidden])'
|
|
|
|
|
let candidate = 'group-focus:group-hover:space-x-4'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [
|
|
|
|
|
{ format: ':merge(.group):hover &', isArbitraryVariant: false },
|
|
|
|
|
{ format: ':merge(.group):focus &', isArbitraryVariant: false },
|
|
|
|
|
]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.group:focus:hover .group-focus\\:group-hover\\:space-x-4 ~ :not([hidden]) ~ :not([hidden])'
|
|
|
|
|
)
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to add multiple unique merge variants to a simple selector', () => {
|
|
|
|
|
let selector = '.text-center'
|
|
|
|
|
let candidate = 'peer-focus:group-hover:text-center'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [
|
|
|
|
|
{ format: ':merge(.group):hover &', isArbitraryVariant: false },
|
|
|
|
|
{ format: ':merge(.peer):focus ~ &' },
|
|
|
|
|
]
|
2023-01-03 09:40:47 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.peer:focus ~ .group:hover .peer-focus\\:group-hover\\:text-center'
|
|
|
|
|
)
|
|
|
|
|
})
|
2023-01-03 09:40:47 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to add multiple unique merge variants to a simple selector', () => {
|
|
|
|
|
let selector = '.text-center'
|
|
|
|
|
let candidate = 'group-hover:peer-focus:text-center'
|
2023-01-03 09:40:47 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [
|
|
|
|
|
{ format: ':merge(.peer):focus ~ &', isArbitraryVariant: false },
|
|
|
|
|
{ format: ':merge(.group):hover &', isArbitraryVariant: false },
|
|
|
|
|
]
|
2023-01-03 09:40:47 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.group:hover .peer:focus ~ .group-hover\\:peer-focus\\:text-center'
|
|
|
|
|
)
|
|
|
|
|
})
|
2023-01-03 09:40:47 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to use multiple :merge() calls with different "arguments"', () => {
|
|
|
|
|
let selector = '.foo'
|
|
|
|
|
let candidate = 'peer-focus:group-focus:peer-hover:group-hover:foo'
|
2023-01-03 09:40:47 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [
|
|
|
|
|
{ format: ':merge(.group):hover &', isArbitraryVariant: false },
|
|
|
|
|
{ format: ':merge(.peer):hover ~ &', isArbitraryVariant: false },
|
|
|
|
|
{ format: ':merge(.group):focus &', isArbitraryVariant: false },
|
|
|
|
|
{ format: ':merge(.peer):focus ~ &', isArbitraryVariant: false },
|
|
|
|
|
]
|
2023-01-03 09:40:47 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.peer:focus:hover ~ .group:focus:hover .peer-focus\\:group-focus\\:peer-hover\\:group-hover\\:foo'
|
|
|
|
|
)
|
|
|
|
|
})
|
2023-01-03 09:40:47 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('group hover and prose headings combination', () => {
|
|
|
|
|
let selector = '.text-center'
|
|
|
|
|
let candidate = 'group-hover:prose-headings:text-center'
|
|
|
|
|
let formats = [
|
|
|
|
|
{ format: ':where(&) :is(h1, h2, h3, h4)', isArbitraryVariant: false }, // Prose Headings
|
|
|
|
|
{ format: ':merge(.group):hover &', isArbitraryVariant: false }, // Group Hover
|
|
|
|
|
]
|
|
|
|
|
|
|
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.group:hover :where(.group-hover\\:prose-headings\\:text-center) :is(h1, h2, h3, h4)'
|
|
|
|
|
)
|
|
|
|
|
})
|
2023-01-03 09:40:47 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('group hover and prose headings combination flipped', () => {
|
|
|
|
|
let selector = '.text-center'
|
|
|
|
|
let candidate = 'prose-headings:group-hover:text-center'
|
|
|
|
|
let formats = [
|
|
|
|
|
{ format: ':merge(.group):hover &', isArbitraryVariant: false }, // Group Hover
|
|
|
|
|
{ format: ':where(&) :is(h1, h2, h3, h4)', isArbitraryVariant: false }, // Prose Headings
|
|
|
|
|
]
|
|
|
|
|
|
|
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
':where(.group:hover .prose-headings\\:group-hover\\:text-center) :is(h1, h2, h3, h4)'
|
|
|
|
|
)
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to handle a complex utility', () => {
|
|
|
|
|
let selector = '.space-x-4 > :not([hidden]) ~ :not([hidden])'
|
|
|
|
|
let candidate = 'peer-disabled:peer-first-child:group-hover:group-focus:focus:hover:space-x-4'
|
|
|
|
|
let formats = [
|
|
|
|
|
{ format: '&:hover', isArbitraryVariant: false }, // Hover
|
|
|
|
|
{ format: '&:focus', isArbitraryVariant: false }, // Focus
|
|
|
|
|
{ format: ':merge(.group):focus &', isArbitraryVariant: false }, // Group focus
|
|
|
|
|
{ format: ':merge(.group):hover &', isArbitraryVariant: false }, // Group hover
|
|
|
|
|
{ format: ':merge(.peer):first-child ~ &', isArbitraryVariant: false }, // Peer first-child
|
|
|
|
|
{ format: ':merge(.peer):disabled ~ &', isArbitraryVariant: false }, // Peer disabled
|
|
|
|
|
]
|
|
|
|
|
|
|
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.peer:disabled:first-child ~ .group:hover:focus .peer-disabled\\:peer-first-child\\:group-hover\\:group-focus\\:focus\\:hover\\:space-x-4:hover:focus > :not([hidden]) ~ :not([hidden])'
|
|
|
|
|
)
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should match base utilities that are prefixed', () => {
|
|
|
|
|
let context = { tailwindConfig: { prefix: 'tw-' } }
|
|
|
|
|
let selector = '.tw-text-center'
|
|
|
|
|
let candidate = 'tw-text-center'
|
|
|
|
|
let formats = []
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate, context })).toEqual('.tw-text-center')
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should prefix classes from variants', () => {
|
|
|
|
|
let context = { tailwindConfig: { prefix: 'tw-' } }
|
|
|
|
|
let selector = '.tw-text-center'
|
|
|
|
|
let candidate = 'foo:tw-text-center'
|
|
|
|
|
let formats = [{ format: '.foo &', isArbitraryVariant: false }]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate, context })).toEqual(
|
|
|
|
|
'.tw-foo .foo\\:tw-text-center'
|
|
|
|
|
)
|
|
|
|
|
})
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should not prefix classes from arbitrary variants', () => {
|
|
|
|
|
let context = { tailwindConfig: { prefix: 'tw-' } }
|
|
|
|
|
let selector = '.tw-text-center'
|
|
|
|
|
let candidate = '[.foo_&]:tw-text-center'
|
|
|
|
|
let formats = [{ format: '.foo &', isArbitraryVariant: true }]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate, context })).toEqual(
|
|
|
|
|
'.foo .\\[\\.foo_\\&\\]\\:tw-text-center'
|
|
|
|
|
)
|
|
|
|
|
})
|
2023-01-20 12:45:04 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('Merged selectors with mixed combinators uses the first one', () => {
|
|
|
|
|
// This isn't explicitly specced behavior but it is how it works today
|
|
|
|
|
|
|
|
|
|
let selector = '.text-center'
|
|
|
|
|
let candidate = 'text-center'
|
|
|
|
|
let formats = [
|
|
|
|
|
{ format: ':merge(.group):focus > &', isArbitraryVariant: true },
|
|
|
|
|
{ format: ':merge(.group):hover &', isArbitraryVariant: true },
|
|
|
|
|
]
|
|
|
|
|
|
|
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.group:hover:focus > .text-center'
|
|
|
|
|
)
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
describe('real examples', () => {
|
|
|
|
|
it('example a', () => {
|
|
|
|
|
let selector = '.placeholder-red-500::placeholder'
|
|
|
|
|
let candidate = 'hover:placeholder-red-500'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [{ format: '&:hover', isArbitraryVariant: false }]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.hover\\:placeholder-red-500:hover::placeholder'
|
2023-01-20 12:45:04 -05:00
|
|
|
)
|
|
|
|
|
})
|
|
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('example b', () => {
|
|
|
|
|
let selector = '.space-x-4 > :not([hidden]) ~ :not([hidden])'
|
|
|
|
|
let candidate = 'group-hover:hover:space-x-4'
|
2023-01-20 12:45:04 -05:00
|
|
|
|
2023-01-03 09:40:47 -05:00
|
|
|
let formats = [
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
{ format: '&:hover', isArbitraryVariant: false },
|
|
|
|
|
{ format: ':merge(.group):hover &', isArbitraryVariant: false },
|
2023-01-03 09:40:47 -05:00
|
|
|
]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
2023-01-03 09:40:47 -05:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
'.group:hover .group-hover\\:hover\\:space-x-4:hover > :not([hidden]) ~ :not([hidden])'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
)
|
|
|
|
|
})
|
|
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should work for group-hover and class dark mode combinations', () => {
|
|
|
|
|
let selector = '.text-center'
|
|
|
|
|
let candidate = 'dark:group-hover:text-center'
|
2023-01-20 12:45:04 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [
|
|
|
|
|
{ format: ':merge(.group):hover &', isArbitraryVariant: false },
|
|
|
|
|
{ format: '.dark &', isArbitraryVariant: false },
|
|
|
|
|
]
|
2023-01-20 12:45:04 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.dark .group:hover .dark\\:group-hover\\:text-center'
|
|
|
|
|
)
|
|
|
|
|
})
|
2023-01-20 12:45:04 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should work for group-hover and class dark mode combinations (reversed)', () => {
|
|
|
|
|
let selector = '.text-center'
|
|
|
|
|
let candidate = 'group-hover:dark:text-center'
|
2023-01-20 12:45:04 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [
|
|
|
|
|
{ format: '.dark &' },
|
|
|
|
|
{ format: ':merge(.group):hover &', isArbitraryVariant: false },
|
|
|
|
|
]
|
2023-01-20 12:45:04 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
|
|
|
|
'.group:hover .dark .group-hover\\:dark\\:text-center'
|
|
|
|
|
)
|
|
|
|
|
})
|
2023-01-20 12:45:04 -05:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
describe('prose-headings', () => {
|
|
|
|
|
it('should be possible to use hover:prose-headings:text-center', () => {
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
let selector = '.text-center'
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let candidate = 'hover:prose-headings:text-center'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [{ format: ':where(&) :is(h1, h2, h3, h4)' }, { format: '&:hover' }]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
2023-01-03 09:40:47 -05:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
':where(.hover\\:prose-headings\\:text-center) :is(h1, h2, h3, h4):hover'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
)
|
|
|
|
|
})
|
|
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
it('should be possible to use prose-headings:hover:text-center', () => {
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
let selector = '.text-center'
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let candidate = 'prose-headings:hover:text-center'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
let formats = [{ format: '&:hover' }, { format: ':where(&) :is(h1, h2, h3, h4)' }]
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
|
2023-01-03 09:40:47 -05:00
|
|
|
expect(finalizeSelector(selector, formats, { candidate })).toEqual(
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
':where(.prose-headings\\:hover\\:text-center:hover) :is(h1, h2, h3, h4)'
|
Improve `addVariant` API (#5809)
* fix incorrect comment
Probably messed this up in another PR, so just a bit of cleaning.
* implement a formatVariantSelector function
This will be used to eventually simplify the addVariant API.
The idea is that it can take a list of strings that define a certain
format. Then it squashes everything to a single format how you would
expect it.
E.g.:
Input:
- '&:hover'
- '&:focus'
- '.dark &'
- ':merge(.group):hover &'
- ':merge(.group):focus &'
Output:
- ':merge(.group):focus:hover .dark &:focus:hover'
The API here is:
- `&`, this means "The parent" or "The previous selector" (you can
think of it like if you are using nested selectors)
- `:merge(.group)`, this means insert a `.group` if it doesn't exist
yet, but if it does exist already, then merge the new value with the
old value. This allows us to merge group-focus, group-hover into a
single `.group:focus:hover ...`
* add new `format`, `withRule` and `wrap` API for addVariant
* implement backwards compatibility
This will ensure that the backwards compatibility for `modifySelectors`
and direct mutations to the `container` will still work.
We will try to capture the changes made to the `rule.selector`, we will
also "backup" the existing selector. This allows us to diff the old and
new selectors and determine what actually happened.
Once we know this, we can restore the selector to the "old" selector and
add the diffed string e.g.: `.foo &`, to the `collectedFormats` as if
you called `format()` directly. This is a bunch of extra work, but it
allows us to be backwards compatible.
In the future we could also warn if you are using `modifySelectors`, but
it is going to be a little bit tricky, because usually that's
implemented by plugin authors and therefore you don't have direct
control over this. Maybe we can figure out the plugin this is used in
and change the warning somehow?
* fix incorrect test
This was clearly a bug, keyframes should not include escaped variants at
all. The reason this is here in the first place is because the nodes in
a keyframe are also "rule" nodes.
* swap the order of pseudo states
The current implementation had a strange side effect, that resulted in
incorrect class definitions. When you are combining the `:hover` and
`:focus` event, then there is no difference between `:hover:focus` and
`:focus:hover`.
However, when you use `:hover::file-selector-button` or `::file-selector-button:hover`,
then there is a big difference. In the first place, you can hover over the full file input
to apply changes to the `File selector button`.
In the second scenario you have to hover over the `File selector button` itself to apply changes.
You can think of it as function calls:
- focus(hover(text-center))
What you would expect is something like this:
`.focus\:hover\:text-center:hover:focus`, where `hover` is on the
inside, and `focus` is on the outside. However in the current
implementation this is implemented as
`.focus\:hover\:text-cener:focus:hover`
* add more variant tests for the new API
* update parallel variants tests to make use of new API
* implement core variants with new API
* simplify/cleanup existing plugin utils
We can get rid of this because we drastically simplified the new
addVariant API.
* add addVariant shorthand signature
The current API looks like this:
```js
addVariant('name', ({ format, wrap }) => {
// Wrap in an atRule
wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' }))
// "Mutate" the selector, for example prepend `.dark`
format('.dark &')
})
```
It is also pretty common to have this:
```js
addVariant('name', ({ format }) => format('.dark &'))
```
So we simplified this to:
```js
addVariant('name', '.dark &')
```
It is also pretty common to have this:
```js
addVariant('name', ({ wrap }) => wrap(postcss.atRule({ name: 'media', params: '(prefers-reduced-motion: reduce)' })))
```
So we simplified this to:
```js
addVariant('name', '@media (prefers-reduced-motion: reduce)')
```
* improve fontVariantNumeric implementation
We will use `@defaults`, so that only the resets are injected for the
utilities we actually use.
* fix typo
* allow for nested addVariant shorthand
This will allow to write something like:
```js
addVariant('name', `
@supports (hover: hover) {
@media (print) {
&:hover
}
}
`)
// Or as a one-liner
addVariant('name', '@supports (hover: hover) { @media (print) { &:hover } }')
```
* update changelog
2021-10-18 11:26:11 +02:00
|
|
|
)
|
|
|
|
|
})
|
2023-01-20 12:45:04 -05:00
|
|
|
})
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
})
|
2021-11-12 16:38:03 +01:00
|
|
|
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
describe('pseudo elements', () => {
|
|
|
|
|
it.each`
|
|
|
|
|
before | after
|
|
|
|
|
${'&::before'} | ${'&::before'}
|
|
|
|
|
${'&::before:hover'} | ${'&:hover::before'}
|
|
|
|
|
${'&:before:hover'} | ${'&:hover:before'}
|
|
|
|
|
${'&::file-selector-button:hover'} | ${'&::file-selector-button:hover'}
|
|
|
|
|
${'&:hover::file-selector-button'} | ${'&:hover::file-selector-button'}
|
|
|
|
|
${'.parent:hover &'} | ${'.parent:hover &'}
|
|
|
|
|
${'.parent::before &'} | ${'.parent &::before'}
|
|
|
|
|
${'.parent::before &:hover'} | ${'.parent &:hover::before'}
|
|
|
|
|
${':where(&::before) :is(h1, h2, h3, h4)'} | ${':where(&) :is(h1, h2, h3, h4)::before'}
|
|
|
|
|
${':where(&::file-selector-button) :is(h1, h2, h3, h4)'} | ${':where(&::file-selector-button) :is(h1, h2, h3, h4)'}
|
|
|
|
|
${'#app :is(.dark &::before)'} | ${'#app :is(.dark &)::before'}
|
|
|
|
|
${'#app :is(:is(.dark &)::before)'} | ${'#app :is(:is(.dark &))::before'}
|
|
|
|
|
${'#app :is(.foo::file-selector-button)'} | ${'#app :is(.foo)::file-selector-button'}
|
|
|
|
|
${'#app :is(.foo::-webkit-progress-bar)'} | ${'#app :is(.foo)::-webkit-progress-bar'}
|
|
|
|
|
${'.parent::marker li'} | ${'.parent li::marker'}
|
|
|
|
|
${'.parent::selection li'} | ${'.parent li::selection'}
|
|
|
|
|
${'.parent::placeholder input'} | ${'.parent input::placeholder'}
|
|
|
|
|
${'.parent::backdrop dialog'} | ${'.parent dialog::backdrop'}
|
|
|
|
|
`('should translate "$before" into "$after"', ({ before, after }) => {
|
|
|
|
|
let result = finalizeSelector('.a', [{ format: before, isArbitraryVariant: false }], {
|
|
|
|
|
candidate: 'a',
|
2023-01-20 12:45:04 -05:00
|
|
|
})
|
Merge engines (#11275)
* Simplify CI, make oxide engine the default (#11281)
* remove integration tests for the `stable` engine
* make `integration-tests-oxide` the default integration tests workflow
* remove unnecessary CACHE_PREFIX
* drop `ci-stable.yml` workflow
* make `CI — Oxide` the default
+ drop testing against 3.3 branch (since this is stable only)
+ remove unnecessary CACHE_PREFIX
* drop `release-insiders-stable.yml` workflow
* make `Release Insiders — Oxide` the default
+ change release channel to just `insiders` instead of `oxide-insders`
* drop 3.3 branch from integration tests
* change job name for insiders release
This makes it consistent with the other job names
* prep `release-oxide.yml` workflow to be the default workflow
* add Tailwind Play update
Currently commented out until we figure out how this will work exactly.
* use `env.VERSION` for the version we want to release
* drop `release-stable.yml` workflow
* make `release-oxide.yml` the default `release.yml` workflow
* inline "Calculate environment variables" step
* cache node_modules and cargo related files/folders in the release step
* always use the default CLI
* drop oxide specific implementation
* ensure we test `--postcss` in the CLI
Even for the Oxide engine
* always process `@import` rules
* remove `generalizedModifiers` flag
This was already enabled by default. This commits removes some of the
outstanding references to it.
* remove built-in peer dependencies for the CLI
* drop unused esbuild dependency
* fix type for `configBag`
* setup Lightning CSS for the CLI
* drop `cssnano` dependency
We only used this in the CLI and we now use Lighting CSS which has this
built in already. Therefore we can get rid of this as a dependency.
* ensure `imported.css` file exists in integration tests
* passthrough `options` to lightningcss
Ideally we can read this from `result.map` instead. However this doesn't
get filled in for whatever reason even though we use `map: {inline:true}`.
You can run the `tests/cli.test.js`, and more specifically the
`--postcss supports process options with custom config` test.
* Always process CSS with Lightning CSS
Some tests temporarily skipped. Autoprefixer removed from `postcss.config.js` stubs since vendor prefixing handled by Lightning.
* Remove code for normalizing `@import "tailwindcss/*"` statements
* ensure tailwind doesn't crash when a `tailwind.config.js` file is not present
* add `log.group` to group multiple messages together with different types
* remove engine specific checks in integration tests
* remove unused imports/variables
Make linting check happy
* support `content: ['auto']`
This will allow us to still use auto content detection, but since this
is part of the `content` array, it also allows you to add custom paths
if you want.
E.g.:
```js
content: ['auto', './node_modules/my-library/*.{jsx,tsx}']
```
* ensure `content.files` is always an array
This allows us to simplify some checks because 'auto' will now be part
of the array instead of checking if `content.files` is auto or if it is
an array containing 'auto'.
* fix tests, ensure default config is not injected
* simplify `auto` normalization
* always use the defaultFullConfig
No need to override the defaultFullConfig with `{content: 'auto'}`
because this will be included in the default config already.
* drop condition which ensured `files` was an empty array
This is not needed anymore because when `content` is omitted it behaves
as if it was set to `auto`.
* drop removal of `content`
We used to remove the `content` from the actual configuration files when
using `tailwindcss init` for the oxide engine. This was to ensure that
`auto content detection` was used instead (by default).
But now it is always enabled by default therefore this is not needed
anymore.
* ensure setting `content: 'auto'` works
* improve file cache handling
We have to make sure that we get into the previous state whenver a test
is done.
We were using some `!fileCache[filePath]` checks, however we also used
`null` as a sentinel value when something wasn't found. But, `null` is
falsey as well so some checks where incorrect.
Using a dedicated value and a `Map` makes this safer and more correct
because we can now use `.has()`.
* drop `cleanupFile`, `removeFile` will already take care of it
* drop oxide check in `resolvedChangedContent`
At this point the `context.tailwindConfig.content.files` is already
fully resolved regardless of the engine we are in.
* refactor `parseCandidateStringsFromFiles` strategy, to make use of a proper feature flag
* use feature flag for sorting classes
Once the Oxide engine is the default default, then we can drop this
entirely because the result from the Rust parser will already be sorted.
* drop `crosscheck` from tests where it is safe
First pass of deleting `crosscheck`. These are all the places where we
didn't have any differences between the Oxide and Stable engine.
* replace `__OXIDE__` in corePlugins with feature flag
* use `globalThis.__OXIDE__ ?? false`
This will ensure that in places where we don't have `__OXIDE__` that we
can still properly fallback to `false`.
* use `flex` as the go-to utility when testing features
* prefer `space-utilities` tests instead of `oxide` test
* drop crosscheck check
Since the `oxideParser` is disabled by default, all the tests can use
the `stable` output.
* use simple `false` default values for feature flag defaults
* drop `__OXIDE__` injections in build scripts
* use stable `flex` and `z-{...}` utilities instead of color utilities
flex and z-index related utilities are more stable than the color
utilities right now because the color utilities will use a raw color
value or a combination with a css variable depending on a feature flag.
* drop unused `ENGINE` environment variable
* drop stable engine manifest files
* drop `swap-engines` tooling
---------
Co-authored-by: Adam Wathan <4323180+adamwathan@users.noreply.github.com>
2023-05-25 04:10:00 +02:00
|
|
|
|
|
|
|
|
expect(result).toEqual(after.replace('&', '.a'))
|
2021-11-12 16:38:03 +01:00
|
|
|
})
|
|
|
|
|
})
|