Fixes out of array access
Fixes: da14e86d8462be6493eab16bc2d40f88/asan_heap-oob_204cfd2_528_cov_340150052_COMPRESS.BMP
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit f7e1367f58)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes Ticket4227
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 2c660e34cf)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is the remaining error, the output on the SPX samples,
respectively csi_miami_stereo_128_spx.eac3 and
csi_miami_5.1_256_spx.eac3, goes from:
stddev: 8.71 PSNR: 77.52 MAXDIFF: 235
stddev:24270.51 PSNR: 22.17 MAXDIFF:47166
to:
stddev: 0.12 PSNR:114.12 MAXDIFF: 1
stddev: 0.12 PSNR:114.73 MAXDIFF: 1
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 0c3339f4bd)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It was set to 1 instead of sqrt(3)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit c4bf3833f4)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Should also improve decoding, but actually doesn't...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit b083440060)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The AC3DecodeContext has a float (USE_FIXED=0) and an integer
(USE_FIXED=1) variant, both of which can be present in the same binary.
This is not only very confusing, but it also breaks horribly, when one
variant is used by code expecting the other.
This currently happens, because eac3dec.c is only compiled for the float
variant, but also used from ac3dec_fixed.c, which uses the integer
variant.
The result is memory corruption, leading to crashes.
So compile eac3dec.c once for each variant and adapt it, so that it
works with the integer variant.
A loss of precission and scaling bug has been fixed by the committer
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 7b05b5093e)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also add av_cold to ff_hevcdsp_init_arm.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit d5addf1555)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array accesses
Fixes: ffmpeg_012v_crash.ts
Found-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Reviewed-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 48df30d36c)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes division by 0
Found-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit d3b25383da)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
So far it is only set in roq_encode_frame, but it is used in
roq_encode_end to free the coded_frame. This currently segfaults if
roq_encode_frame is not called between roq_encode_init and
roq_encode_end.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit cf82c426fa)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
allowing access to the size but not the extradata itself is not useful
and could lead to potential problems if writing happens through this field
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Reviewed-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 1f4088b285)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This ensures that all current and future code-pathes get bpp checked
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit d5e9fc7821)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: ffmpeg_opus_crash1.ogg
This solution is likely not optimal in terms of error concealment but
its simple and fixes the out of array access.
Found-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Tested-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 6c583e9048)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is safer than to assume that all error pathes cleared them and
nothing will use uncleared pointers.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 1ae092587f)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array accesses
Fixes: ffmpeg_mjpeg_crash2.avi
Found-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Tested-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit e3201c38d5)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This mainly consists of replacing all the pointer arithmatic 'addiu'
instructions with PTR_ADDIU which will handle the differences in pointer
sizes when compiled on 64 bit mips systems.
The header asmdefs.h contains the PTR_ macros which expend to the correct mips
instructions to manipulate registers containing pointers.
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Reviewed-by: Nedeljko Babic <Nedeljko.Babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There are no independant uses of mips32r2 instructions except for the
FPU parts. Due to the heavy use of mips32r2 specifc fpu extensions, I
am guessing the original author intended MIPSFPU to imply MIPS32R2 anyway.
Since these fpu instructions are available on mips64 (non-r2), enable them
there as well.
Also remove the last occurence of HAVE_MIPS32R2 (which is coupled to
HAVE_MIPSFPU anyway).
mips32r2 is left in the list of options form compatability so that using
--disable-mips32r2 doesn't break anything.
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Removing these removes the dependency of this code on mips32r2 which would
allow it to be used on processors which have FPU instructions, but not r2
instructions (like the mips64el debian port for instance).
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Reviewed-by: Nedeljko Babic <Nedeljko.Babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead, warn that bitrate will be clamped down to the maximum allowed.
Patch is mostly work of Kamendo2 in issue #2686, quite tested within that issue.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
According to the WebP Lossless Bitstream Specification
"each transform is allowed to be used only once".
If a transform is more than once this can lead to memory
corruption.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If it doesn't fit into 12 bits it triggers an assertion.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
According to the WebP Lossless Bitstream Specification the highest
allowed value for a prefix code is 39.
If prefix_code is too large, the calculated extra_bits has an invalid
value and triggers an assertion in get_bits.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Regular autovariance is no longer "experimental", and a version of it with
bias towards dark scenes is now in mainline x264.
Signed-off-by: Peter Cordes <peter@cordes.ca>
* commit '25f613f8be':
dca: Move syncword definitions to a separate header
Conflicts:
libavcodec/dca_parser.c
libavformat/dtsdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Although the specification mandates this bit to zero, it may happen
that software tools incorrectly flip it to one, invalidating a possibly
valid stream.
Relax this restriction, by failing only when AV_EF_BITSTREAM is set.
This behaviour is similar to aac decoders in Firefox and Quicktime.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The macro is implemented as a do{}while()
enclosing this is () appears to be a GNU extension (6.1 Statements and Declarations in Expressions)
the () is also unneeded and wrong as the macro returns no
value
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes pixel values not being properly shifted in
libopenjpeg_copyto16 and libopenjpeg_copy_to_packed16 methods.
Pixel formats like xyz12le need to be shifted by AVComponentDescriptor::shift
to get the correct values.
Reviewed-by: Michael Bradshaw <mjbshaw@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
On mips64, the registers t[4-7] do not exist. Instead of using a lot of #ifdef
or defines to handle differing register names, use variables and let GCC
allocate the registers automatically (like in the other mips assembly files).
In get_band_cost_ESC_mips, t4 and t5 were renamed to t6 and t7 to avoid a
variable name conflict.
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Reviewed-by: Nedeljko Babic <Nedeljko.Babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is obviously needed for 64-bit support.
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Reviewed-by: Nedeljko Babic <Nedeljko.Babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Normally the aic decoder finds the proper slice combination (multiple of
some number less than 32) but in case of odd width, it resorts to the
default values, which were actually swapped.
The number of slices is modified to account for such odd width cases.
CC: libav-stable@libav.org
