The latest generation video decoder on the Turing chips supports
decoding HEVC 4:4:4. Supporting this is relatively straight-forward;
we need to account for the different chroma format and pick the
right output and sw formats at the right times.
There was one bug which was the hard-coded assumption that the
first chroma plane would be half-height; I fixed this to use the
actual shift value on the plane.
We also need to pass the SPS and PPS range extension flags.
We need all the flags to be exposed to be able to pass them on to
HW decoders. I did not attempt to nuance any of the warnings about
flags being unsupported as there's no way, at the point we extract
flags, to say whether an HW decoder is being used.
Fixes some rather embarrassing mistakes that somehow passed my
eyes.
* Now catches if memory allocation has failed during bprint usage
by checking av_bprint_is_complete().
* Now catches if adding an ASS rectangle into an AVSubtitle failed.
* Returns AVERROR_INVALIDDATA if we get an invalid region buffer
length.
* Outputs ASS lines with basic coloring and font scaling for each
given region.
* Sets the default style to the resolution of the subtitle plane
(for example, 960x540 / 36pt font for profile A).
* Has options to:
* Disable ruby text (which is coded as regions which have
half-height text in libaribb24).
Enabled by default as without positioning ruby text only
confuses as it is usually coded in the beginning of the decoded
subtitle line.
* Set the working directory, in which libaribb24 will read
configuration as well as into which it may save broadcast extra
symbols as PNG.
Unset by default.
The unconventional library check can be explained by the library's
current master branch being licensed as LGPLv3, but at the time of
writing the latest official release is still licensed under GPLv3.
Thus, one either has to wait for the following release, or enable
GPLv3.
This is robust for some corner case there is incorrect list1 count
in pps header, but it's a P slice and can be decoded well.
Signed-off-by: Decai Lin <decai.lin@intel.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
instead of an ad-hoc function to search for start codes in order to
remove code duplication and to improve performance.
Improved performance of finding startcodes from 52606 decicycles to
9543 decicycles based upon 262144 runs for a 1 Mb/s MPEG4 video.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In such a duplication the previous gets overwritten and leaks
Fixes: memleak
Fixes: 12510/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_PGSSUB_fuzzer-5694439226343424
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_qpel_h_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 2%(2.39x to 2.44x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_qpel_bi_h_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 2.1%(2.34x to 2.39x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_epel_bi_hv_8 with mmi in the case width=4/8/12/16/24/32.
This optimization improved HEVC decoding performance 1.7%(2.30x to 2.34x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_qpel_uni_hv_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 2.7%(2.24x to 2.30x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
No speed difference, or slightly faster (the difference is too small so it may be noise
that this appears faster)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
We assume that if the compressed size is bigger than if each byte is encoded in a single raw packet
that the data is invalid.
Fixes: Out of memory
Fixes: 12208/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RASC_fuzzer-5648916473708544
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: Timeout
Fixes: 12192/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RSCC_fuzzer-6279038004363264
Before: clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RSCC_fuzzer-6279038004363264 in 15423 ms
After: clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RSCC_fuzzer-6279038004363264 in 190 ms
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array access
Fixes: 12447/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HYMT_fuzzer-5201623956062208
Fixes: 12458/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HYMT_fuzzer-5705567736168448
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The addition is moved up into the context where the variable is unsigned avoiding
the undefined behavior
Fixes: runtime error: signed integer overflow: 2147481972 + 4096 cannot be represented in type 'int'
Fixes: 12444/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ILBC_fuzzer-5755706244857856
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When making a new P-frame when B-frames are present the previous P-frame
is normally in the DPB because it will be referred to by subsequent
B-frames. However, this is not true if there are no B-frames, or in edge
cases where a GOP ends with two P-frames. Fix this by adding the direct
ref pics to the RPS explicitly.
Fixes#7699.
Tested-by: Ullysses A Eoff <ullysses.a.eoff@intel.com>
The VP3/4/5/6 reference decoders all use three IDCT versions: one for the
DC-only case, another for blocks with more than 10 coefficients, and an
optimised one for blocks with up to 10 AC coefficents. VP6 relies on the
sparse 10 coefficient version, and without it, IDCT drift occurs.
Fixes: https://trac.ffmpeg.org/ticket/1282
Signed-off-by: Peter Ross <pross@xvid.org>
QVBR mode is to use the variable bitrate control algorithm
with constant quality.
mfxExtCodingOption3 should be supported to enable QVBR mode.
It is neccesary to specify a max_rate for QVBR, else it may be ICQ mode.
Example usage: ffmpeg -hwaccel qsv -c:v h264_qsv -i input.mp4 -c:v
h264_qsv -global_quality 25 -maxrate 2M test_qvbr.mp4 -v verbose
Clip QVBR quality range to be [0, 51] as Mark's commments.
It is similar to qp range of CQP but possibly should be updated when VP8/VP9
encoding can be supported.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Zhong Li <zhong.li@intel.com>
