Add command 'delays' to the adelay filter.
This command accepts same values as the option with one difference, to apply
delay to all channels prefix 'all:' to the argument.
Signed-off-by: David Lacko <deiwo101@gmail.com>
This reduces sibilance distortion when sibilance and bass are
present at the same time. Bringing the protection of high
frequencies up to about the same level as for low frequencies
should also make the quality less dependent on the frequency
balance of the playback system.
Signed-off-by: Jason Jang <jcj83429@gmail.com>
Ignore more samples that are near the edge of the block. The reason
is that the filtering tends to cause these samples to go above the
window more than the samples near the middle. If these samples are
included in the unwindowed peak estimation, the peak can be
overestimated. Because the block is windowed again before
overlapping, overshoots near the edge of the block are not very
important.
0.1 is the value from the version originally contributed to calf.
Signed-off-by: Jason Jang <jcj83429@gmail.com>
With a complex FFT instead of real FFT, the negative frequencies
are not dropped from the spectrum output, so they need to be scaled
when the positive frequencies are scaled. The location of the top
bin is also different.
Signed-off-by: Jason Jang <jcj83429@gmail.com>
This can fill VAProcPipelineParameterBuffer correctly and make the
pipeline works.
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Overlay one video on the top of another.
It takes two inputs and has one output. The first input is the "main" video on
which the second input is overlaid. This filter requires same memory layout for
all the inputs.
An example command to use this filter to overlay overlay.mp4 at the top-left
corner of the main.mp4:
ffmpeg -init_hw_device vaapi=foo:/dev/dri/renderD128 \
-hwaccel vaapi -hwaccel_device foo -hwaccel_output_format vaapi -c:v h264 -i main.mp4 \
-hwaccel vaapi -hwaccel_device foo -hwaccel_output_format vaapi -c:v h264 -i overlay.mp4 \
-filter_complex "[0:v][1:v]overlay_vaapi=0:0:100💯0.5[t1]" \
-map "[t1]" -an -c:v h264_vaapi -y out_vaapi.mp4
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Zachary Zhou <zachary.zhou@intel.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
To trigger this bug, use `paletteuse=dither=bayer:bayer_scale=0`; you will see
that adjacent pixel lines will use the same dither pattern, instead of being
shifted from each other by 32 units (0x20).
One way to demostrate the bug is:
$ convert -size 64x256 gradient:black-white -rotate 270 grad.png
$ echo 'P2 2 1 255 0 255' > bw.pnm
$ ffmpeg -i grad.png -filter_complex 'movie=bw.pnm,scale=256x1[bw]; [0:v][bw]paletteuse=dither=bayer:bayer_scale=0' gradbw.png
Previously: https://www.rm.cloudns.org/img/uploaded/0bd152c11b9cd99e5945115534b1bdde.png
Now: https://www.rm.cloudns.org/img/uploaded/89caaa5e36c38bc2c01755b30811f969.png
This was caused by passing inconsistent color vs (a,r,g,b) parameters to
color_get(), and NBITS being 5 meaning actually hitting the same cache node
does happen in this case, but ONLY if bayer_scale is zero.
The fix is passing the correct color value to color_get().
Also added a previous-failing FATE test; image comparison of the first frame:
Previously: https://www.rm.cloudns.org/img/uploaded/d0ff9db8d8a7d8a3b8b88bbe92bf5fed.png
Now: https://www.rm.cloudns.org/img/uploaded/a72389707e719b5cd1c58916a9e79ca8.png
(on this less synthetic test image, the bug basically causes noise from cache
hits vs misses)
Tested: FATE passes, which exercises this filter but at the default bayer_scale.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
