Do this by switching to bytestream2_(get|put)_le32u() from
bytestream2_(get|put)_le32(); it has after all already been checked
that the packet contains at least a full header, making all
the implicit checks in bytestream2_(get|put)_le32() dead code.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Therefore move the (Get|Put)ByteContext from the context to the stack.
It is transient anyway.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Reviewed-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
SEI messages are naturally byte-aligned by adding padding bits
to achieve byte-alignment. The parsing code in libavcodec/hevc_sei.c
nevertheless uses a GetBitContext to read it. When doing so, parsing
the next SEI message starts exactly at the position where reading
the last message (if any) ended.
This means that one would have to handle both the payload extension data
(which makes most SEI messages extensible structs) as well as the
padding bits for byte-alignment. Yet our SEI parsing code in
libavcodec/hevc_sei.c does not read these at all. Instead several of
the functions used for parsing specific SEI messages use
skip_bits_long(); some don't use it at all, in which case it is possible
for the GetBitContext to not be byte-aligned at the start of the next
SEI message (the parsing code for several types of SEI messages relies
on byte-alignment).
Fix this by always using a dedicated GetBitContext per SEI message;
skipping the necessary amount of bytes in the NALU context
is done at a higher level. This also allows to remove unnecessary
parsing code that only existed in order to skip enough bytes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is mostly straightforward. The major complication is that, as a
result of the 16-bit chunk size limitation, ICC profiles may need to be
split up into multiple chunks.
We also need to make sure to allocate enough extra space in the packet
to fit the ICC profile, so modify both mpegvideo_enc.c and ljpegenc.c to
take into account this extra overhead, failing cleanly if necessary.
Also add a FATE transcode test to ensure that the ICC profile gets
written (and read) correctly. Note that this ICC profile is smaller than
64 kB, so this doesn't test the APP2 chunk re-arranging code at all.
Signed-off-by: Niklas Haas <git@haasn.dev>
We re-use the PNGEncContext.zstream for deflate-related operations.
Other than that, the code is pretty straightforward. Special care needs
to be taken to avoid writing more than 79 characters of the profile
description (the maximum supported).
To write the (dynamically sized) deflate-encoded data, we allocate extra
space in the packet and use that directly as a scratch buffer. Modify
png_write_chunk slightly to allow pre-writing the chunk contents like
this.
Also add a FATE transcode test to ensure that the ICC profile gets
encoded correctly.
Signed-off-by: Niklas Haas <git@haasn.dev>
max_14bit_constraint_flag should be set if the bit depth is not greater than
14 (currently always true).
one_picture_only_flag should not be set because we don't support the still
picture profiles.
general_profile_compatibility_flag should be set according to general_profile_idc
instead of bit depth.
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
The block size can be dependent on the profile and entrypoint selected.
It defaults to 16x16, with codecs able to override this choice with their
own function.
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Use GPB frames to replace regular P/B frames if backend driver does not
support it.
- GPB:
Generalized P and B picture. Regular P/B frames replaced by B
frames with previous-predict only, L0 == L1. Normal B frames
still have 2 different ref_lists and allow bi-prediction
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
This will allow using a common threaded decode or encode function from most
codecs using texture DSP functions.
Signed-off-by: Marton Balint <cus@passwd.hu>
The guess_palette() implementation is questionable in itself
as its results don't match those from other DVD subtitle decoders.
This commit starts cleanup by fixing an obvious bug which has made
certain DVD subs appear yellow instead of white or grey for more than
10 years..
Signed-off-by: softworkz <softworkz@hotmail.com>
Signed-off-by: rcombs <rcombs@rcombs.me>
A bug was found in dav1d <= 1.0.0 where the event flag New Sequence Header would
not be signaled for some samples using delayed random access points.
It has since been fixed, but nonetheless it's best to ensure the AVCodecContext
is filled with parameters when parsing the first frame, regardless of what events
were signaled.
Fixes ticket #9694.
Signed-off-by: James Almer <jamrial@gmail.com>
If the svt equivalent option to an avctx AVOption is passed by the user
then it should have priority. The exception are fields like dimensions, bitdepth
and pixel format, which must match what lavc will feed the encoder after init.
This addresses libsvt-av1 issue #1858.
Signed-off-by: James Almer <jamrial@gmail.com>
Qsv encoder only support input P010 and nv12 format directly from system
memory. For other format, we need to upload frame to device memory and
input qsv format to encoder. Now add other system memory format support
to qsv encoder.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Qsv decoder only supports directly output nv12 and p010 to system
memory. For other format, we need to download frame from qsv format
to system memory. Now add other supported format to qsvdec.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
The init_pool_size is set to be 64 and it is too many.
Use IOSurfQuery to get NumFrameSuggest which is the suggested
number of frame that needed to be allocated when initializing the decoder.
Considering that the hevc_qsv encoder uses the most frame buffer,
async is 4 (default) and max_b_frames is 8 (default) and decoder
may followed by VPP, use NumFrameSuggest + 16 to set init_pool_size.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Guangxin Xu <guangxin.xu@intel.com>
Since ffmpeg-qsv uses return value to reinit decoder, it doesn't need to
decode header each time. Move qsv_decode_header's position so that
it will be called only if codec needed to be reinitialized.
Rearrange the code of flushing decoder and re-init decoder operation.
Remove the buffer_count and use the got_frame to decide whether the
decoder is drain.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Guangxin Xu <guangxin.xu@intel.com>
FFmpeg-qsv decoder reinit codec when width and height change, but there
are not only resolution change need to reinit codec. I change it to use
return value from DecodeFrameAsync() to decide whether decoder need to
be reinitialized.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Guangxin Xu <guangxin.xu@intel.com>
In case the BSF has not been drained before flushing/closing,
the context's next_frame might be set; yet it is not freed
in flush or close. The former only zeroes it (which automatically
causes a leak in case it was set). So do this when closing
and flushing.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible, because every given FFCodec has to implement
exactly one of these. Doing so decreases sizeof(FFCodec) and
therefore decreases the size of the binary.
Notice that in case of position-independent code the decrease
is in .data.rel.ro, so that this translates to decreased
memory consumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This increases type-safety by avoiding conversions from/through void*.
It also avoids the boilerplate "AVFrame *frame = data;" line
for non-subtitle decoders.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This increases type-safety by avoiding conversions from/through void*.
It also avoids the boilerplate "AVSubtitle *sub = data;" line
for subtitle decoders. Its only downside is that it increases
sizeof(FFCodec), yet this can be more than offset lateron.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The inputs are unused except for this computation so wraparound
does not give an attacker any extra values as they are already fully
controlled
Fixes: signed integer overflow: 0 - -2147483648 cannot be represented in type 'int'
Fixes: 45820/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_EXR_fuzzer-5766159019933696
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -128275513086 * -76056576 cannot be represented in type 'long'
Fixes: 45818/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_DIRAC_fuzzer-5129799149944832
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -101 * 71041254 cannot be represented in type 'int'
Fixes: 45938/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TAK_fuzzer-4687974320701440
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -2146549696 - 3923884 cannot be represented in type 'int'
Fixes: 45907/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_APE_fuzzer-5992380584558592
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It is currently a "Picture", an mpegvideo-specific type
that has a lot of baggage, all of which is unnecessary
for new_picture, because only its embedded AVFrame
is ever used. So just use an ordinary AVFrame.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
